EU/RHD BMS JB4 OBDII Harness Extension

[mr.suntorytime]

EU/RHD Emira owners who ordered a JB4.

OBD2 harness extensions are now available!

Thank you for your patience!

https://www.darkworks-design.com/products/bms-obdii-harness-extension-1-meter

 

[Bellsemple]

Can you confirm, if you now order a JB4, for a RHD car, you still have to purchase an extension to get it to fit?

 

[mr.suntorytime]

Can you confirm, if you now order a JB4, for a RHD car, you still have to purchase an extension to get it to fit?

Burger motorsports recommends that the JB4 be connected to the OBDII port at all times if you are using any map besides map 0.

To prevent fallen cables from getting caught in the SC/engine belts if cable ties fail, the bracket was designed to be located opposite the SC pulley.

That being said the OBDII harness from BMS is 700mm or so too short to reach the other side of the cabin, so this extension fixes the issue weather you choose to run though the interior grommet or outside the car for diagnostics.

hope this helps!

 

[Bellsemple]

Cheers, for clearing that up, I’ll be putting my order in shortly

 

[dbjames]

EU/RHD Emira owners who ordered a JB4.

OBD2 harness extensions are now available!

Thank you for your patience!

https://www.darkworks-design.com/products/bms-obdii-harness-extension-1-meter

How come you've removed this item from your website?

 

[mr.suntorytime]

How come you've removed this item from your website?

Hi! Burger motorsports has changed their obd connector, so it made it very hard to make these for the newer units they are selling.

If you happen to have the older style of microfit 2x2 i can help you out.

 

[virtualmacho]

Hi! Burger motorsports has changed their obd connector, so it made it very hard to make these for the newer units they are selling.

And the cable on the newer units might be longer. Mine was 4m in length, and didn't need an extension when fed through the lower firewall grommet.