Emira JB4 Tuning Now Available for I4 & V6 Cars!

[squish]

Any more thoughts on v6 Auto? Also can map2 run on 98 AUS?

I installed it on my V6 auto and it ran fantastic for the first week. I then took the plunge to install the OBDII cable through the firewall, and once I had that hooked up it started getting a CEL P0106 and limp mode.

I spent a day emailing back and forth with Terry at Burger and we couldn't find any reason for the CELs - all the connections were solid, no water in the unit, tried it with and without OBDII, etc. I'd clear the code and within 15 minutes of driving it would happen again. We are assuming a bad board or loom, so he is sending me another unit to try. If we still have problems, he said he would take my car for a couple of days and get to the bottom of it. I'll update when I have more info.

 

[Paddle]

I installed it on my V6 auto and it ran fantastic for the first week. I then took the plunge to install the OBDII cable through the firewall, and once I had that hooked up it started getting a CEL P0106 and limp mode.

I spent a day emailing back and forth with Terry at Burger and we couldn't find any reason for the CELs - all the connections were solid, no water in the unit, tried it with and without OBDII, etc. I'd clear the code and within 15 minutes of driving it would happen again. We are assuming a bad board or loom, so he is sending me another unit to try. If we still have problems, he said he would take my car for a couple of days and get to the bottom of it. I'll update when I have more info.

Brilliant. Thanks for taking one for the team

 

[seriously]

View attachment 67687

Pretty proud @David s

No worries your emira is accepted here.

 

[Lotus F1]

JB4 Map 5 is truly rapid

 

[FLTPA]

JB4 Map 5 is truly rapid

Is this what they list as Map 4 w/E30? Or is there a new Map 5

 

[Lotus F1]

Is this what they list as Map 4 w/E30? Or is there a new Map 5

New map 5... Race gas. I mixed 1.5 cans of VP booster to 93 to make 100 octane

 

[Emira Fan]

New map 5... Race gas. I mixed 1.5 cans of VP booster to 93 to make 100 octane

100 octane, lol
I bet it's amazing, must be making over 500HP. Do you have a draggy ? would be interesting to see if your able to break in the 2s. maybe 0-60mph in 2.95s ???

 

[seriously]

New challenge unlocked. Map 5 vs Map pride. Ok I’ll stop now.

 

[Lotus F1]

100 octane, lol
I bet it's amazing, must be making over 500HP. Do you have a draggy ? would be interesting to see if your able to break in the 2s. maybe 0-60mph in 2.95s ???

It already did 3.2 on a lower map. I don't know if there is much more to be gained 0-60. It's more than horsepower, things like traction limits, track conditions, gearing etc. I think 1/4 mile time tells the story of horsepower. I have a draggy pro. However, they just changed the law in Florida. Arrested if going over 100mph. 1/4 this car will be hitting 130ish

 

[Payam@BMS]

New map 5... Race gas. I mixed 1.5 cans of VP booster to 93 to make 100 octane

Careful with boost stuff, it's not really as good as actual 100+ octane.

My go to is the 5 gallon VP MS109 pail, but it's expensive.

 

[Payam@BMS]

View attachment 67687

Hard to see what's going on in this log. Is there something you're worried about?
If so, best to email the .csv file directly to us for evaluation.

 

[David s]

Hard to see what's going on in this log. Is there something you're worried about?
If so, best to email the .csv file directly to us for evaluation.

Not worried at all. Was just commenting on all the pretty colours. Car goes like a scalded cat. Did you want the log for your own research?

 

[Lotus F1]

Careful with boost stuff, it's not really as good as actual 100+ octane.

My go to is the 5 gallon VP MS109 pail, but it's expensive.

VP makes good stuff. Well, I've used their octane booster for my other high boost applications with no issues. Theres been no knock or warning lights thus far.

 

[PatrickJS]

I installed it on my V6 auto and it ran fantastic for the first week. I then took the plunge to install the OBDII cable through the firewall, and once I had that hooked up it started getting a CEL P0106 and limp mode.

I spent a day emailing back and forth with Terry at Burger and we couldn't find any reason for the CELs - all the connections were solid, no water in the unit, tried it with and without OBDII, etc. I'd clear the code and within 15 minutes of driving it would happen again. We are assuming a bad board or loom, so he is sending me another unit to try. If we still have problems, he said he would take my car for a couple of days and get to the bottom of it. I'll update when I have more info.

I have the same issue also v6 auto