Custom MagSafe Wireless Charger

[JonFuller]

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho - iPhone 17 pro (or whatever the most generic design is)
4. Jon Fuller - iPhone 16 Pro
5.
6.
7.
8.
9.
10.

 

[trong74]

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho - iPhone 17 pro (or whatever the most generic design is)
4. Jon Fuller - iPhone 16 Pro
5.
6.
7.
8.
9.
10.

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho - iPhone 17 pro (or whatever the most generic design is)
4. Jon Fuller - iPhone 16 Pro
5. Trong74 - iPhone 17 Pro
6.
7.
8.
9.
10.

 

[Lynxz_]

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho - iPhone 17 pro (or whatever the most generic design is)
4. Jon Fuller - iPhone 16 Pro
5. Trong74 - iPhone 17 Pro
6. Lynxz_ - Pixel 8 Pro
7.
8.
9.
10.

 

[Andrew25]

@silent cilantro I have an iPhone 16 Pro, but will probably swap it next year. How can this be tackled? Is the tray for the 16 Pro able to accomodate other phones as well? If there's a way to have future-proof compatibility with a newer iPhone or Android device, then count me in please! (thanks to @virtualmacho for his suggestions)

 

[Evilllem]

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho - iPhone 17 pro (or whatever the most generic design is)
4. Jon Fuller - iPhone 16 Pro
5. Trong74 - iPhone 17 Pro
6. Lynxz_ - Pixel 8 Pro
7. Evillem - iPhone Air (it should be similar to iPhone 17 pro)
8.
9.
10.

 

[NJemira85]

I've experienced several issues when connecting CarPlay wirelessly. I can only use it plugged. In fact, I disabled wireless connection entirely. That's what's holding me from placing an order atm.

It’s key to fully delete CarPlay profile, then reconnect and when asked, select USB only. This is only way to make sure it isn’t using wireless CarPlay when when plugged in. It’s also the most robust resilient CarPlay experience with best audio.

That said, silent’s tray is awesome and a nice way to stow the phone even if plugged in!

 

[Andrew25]

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho - iPhone 17 pro (or whatever the most generic design is)
4. Jon Fuller - iPhone 16 Pro
5. Trong74 - iPhone 17 Pro
6. Lynxz_ - Pixel 8 Pro
7. Evillem - iPhone Air (it should be similar to iPhone 17 pro)
8. Andrew25 - iPhone 16 Pro and future models (to be confirmed, awaiting Cilantro's response on my previous post #284)
9.
10.

 

[silent cilantro]

@silent cilantro I have an iPhone 16 Pro, but will probably swap it next year. How can this be tackled? Is the tray for the 16 Pro able to accomodate other phones as well? If there's a way to have future-proof compatibility with a newer iPhone or Android device, then count me in please! (thanks to @virtualmacho for his suggestions)

I think a tray that fits an iPhone 17 Pro Max will be pretty universal as it has a horizontal camera bar that extends the width of the phone. Same as the recent Pixels but even taller. An exception would be the Samsung phones with their vertical camera stacks.

Something else to consider is the charging coil is not always vertically centered, depends on the phone. The position of that coil in relation to the camera bump matter because there is limited amount of space in the tray.

I’ll work on printing one for a 17 pro max today to test.

 

[Milk242]

You could do the opposite, just have a raised circle for the magnetic coil assuming all phones follow qi 2.0 standard, that way you don’t have to worry about coil alignment or camera bumps

 

[silent cilantro]

Yeah I considered having the charging pad proud of the base but that caused some phones with weaker magnets to slide off. That should be easy to make if anybody wants that option though.

Pad/coil location still matters for some large phones so they don’t stick out the bottom of the tray

 

[NicolasB]

I have the charger you sold to @GRP and put in his car, which I am guessing is for an iPhone. I am using it for my S25 Ultra, and the magnetic part doesn't hold it steady, but it charges fine. I think my phone is too big and it doesn't make full contact with the magnetic part.

 

[Andrew25]

I think a tray that fits an iPhone 17 Pro Max will be pretty universal as it has a horizontal camera bar that extends the width of the phone. Same as the recent Pixels but even taller. An exception would be the Samsung phones with their vertical camera stacks.

Something else to consider is the charging coil is not always vertically centered, depends on the phone. The position of that coil in relation to the camera bump matter because there is limited amount of space in the tray.

I’ll work on printing one for a 17 pro max today to test.

Let us know if that fits an iPhone 16/17 non max nicely and holds it firmly in place! That would mean that one design would fit at least 4 models: 16/17 pro and pro max

 

[silent cilantro]

Alright good news. Printed a new universal tray yesterday and ordered a bunch of cases from Amazon to test fitment. The new tray will fit:

- All iPhones with MagSafe (12-17, Air)
- Pixel 8-10 including XL models
- Samsung S23-25 normal and Plus (See below for Ultra models.)

The S2X Ultra phones are just too large to fit in the universal tray. They hit the back of the cubby and stick out the front. So like @NicolasB mentioned, the phone will charge (probably at a slower rate) but the magnets won’t hold it.

BUT, I do have a version that will fit those phones. It repositions the magnetic charger pad lower so the phone doesn’t hit the back of the cubby hole. It is also thicker so the bottom of phone clears the center console lip in front of the cubby. Didn’t want to apply those compromises to the universal tray so I’ll just offer this one as a standalone.

*Just a reminder for folks with phones like the Pixel8/9 and Samsung Galaxy. Those phones don't have built it magnets, so you will either need to add a stick on magnet ring (included in the kit) or you will need a case that has built in magnets.*

And one last thing. I’ve had 2 forum members in Europe (Spain and Switzerland) report that their cars did not have the connector behind the glove box. Both V6 first editions. One manual one auto. Because of this I will include a fuse tap kit in case your car doesn’t have the connector, you know, for Lotus reasons lol.

Functionality is the same so you guys can pick if you want to remove the glovebox or fight the fuse access panel!

I will reach out with payment info once we get to 10 people

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho -
4. Jon Fuller - iPhone 16 Pro
5. Trong74 - iPhone 17 Pro
6. Lynxz_ - Pixel 8 Pro
7. Evillem - iPhone Air
8. Andrew25 - iPhone 16 Pro
9.
10.

 

[Andrew25]

Very nice news, great job! I'm in for the new universal tray then

 

[NicolasB]

Is there an option to swap the tray mine uses to fit the S25 Ultra (as mentioned)? Maybe a simple swap w/o changing wiring, etc.?

 

[silent cilantro]

Is there an option to swap the tray mine uses to fit the S25 Ultra (as mentioned)? Maybe a simple swap w/o changing wiring, etc.?

If you don’t care for faster charging. Yes.

I’ll shoot you a message!

 

[silent cilantro]

S25 Plus fits the universal case as well I've updated the first post with all this new info.

 

[Orchardbike]

Alright good news. Printed a new universal tray yesterday and ordered a bunch of cases from Amazon to test fitment. The new tray will fit:

- All iPhones with MagSafe (12-17, Air)
- Pixel 8-10 including XL models
- Samsung S23-25 normal and Plus (See below for Ultra models.)

The S2X Ultra phones are just too large to fit in the universal tray. They hit the back of the cubby and stick out the front. So like @NicolasB mentioned, the phone will charge (probably at a slower rate) but the magnets won’t hold it.

BUT, I do have a version that will fit those phones. It repositions the magnetic charger pad lower so the phone doesn’t hit the back of the cubby hole. It is also thicker so the bottom of phone clears the center console lip in front of the cubby. Didn’t want to apply those compromises to the universal tray so I’ll just offer this one as a standalone.

View attachment 70907

*Just a reminder for folks with phones like the Pixel8/9 and Samsung Galaxy. Those phones don't have built it magnets, so you will either need to add a stick on magnet ring (included in the kit) or you will need a case that has built in magnets.*

And one last thing. I’ve had 2 forum members in Europe (Spain and Switzerland) report that their cars did not have the connector behind the glove box. Both V6 first editions. One manual one auto. Because of this I will include a fuse tap kit in case your car doesn’t have the connector, you know, for Lotus reasons lol.

Functionality is the same so you guys can pick if you want to remove the glovebox or fight the fuse access panel!

I will reach out with payment info once we get to 10 people

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho -
4. Jon Fuller - iPhone 16 Pro
5. Trong74 - iPhone 17 Pro
6. Lynxz_ - Pixel 8 Pro
7. Evillem - iPhone Air
8. Andrew25 - iPhone 16 Pro
9. orchardbike - iPhone 13 max
10.

Add me in for the universal case iPhone 13 Pro Max

 

[silent cilantro]

1. GRP -
2. ross7alex - pixel 8 pro/9 pro XL
3. virtualmacho -
4. Jon Fuller - iPhone 16 Pro
5. Trong74 - iPhone 17 Pro
6. Lynxz_ - Pixel 8 Pro
7. Evillem - iPhone Air
8. Andrew25 - iPhone 16 Pro
9. orchardbike - iPhone 13 max
10.

One to go!