Search results

My dealer just got back to me. The P1074 error for bank two is because the gasket between the (@Aerie) Y pipe and the (Aerie) exhaust has blown out again. At the tune of $800 per repair I'm pretty disappointed. The sound through the titanium cat back is terrific, but the reliability is troubling.

This journey started with the Elise. I had seen the Top Gear episode where Jeremy drove it, and I was hooked. It took several years before I was in a position to buy one, but before that happened I got the chance to sit in it. Well I couldn't get out of it without scooting my butt backwards...

Front Vents (pair) $400 Front Splitter $200 Side Vents (pair) $300 Side Upper Door Sills (pair) $800 Rear Vents (pair) $400 Rear Diffuser Surround $700 Gloss Black Wheels (set) $3.5k Will consider offers. Located in Colorado. Includes shipping within the US. Wheels, Sills and Diffuser Surround...

This came on eighty miles after my oil change. Not sure that it's related but.... ODB2 lists the code as permanent and confirmed. I don't see this listed anywhere else on the forum.

I had one of these made for me and the quality is great. They do magsafe for iPhone, but not for Pixel at the moment so I can't use mine. Still, great customer service and highly recommend. They even do custom designs as pictured below. https://www.ejusracing.com/speed-shop/lotus It's hard...

No spacers but above sixty or seventy a decent amount of shimmy. Is this road feel or an imbalanced wheel?

Two weeks ago I lost total power while driving. My ODB2 scanner showed a permanent failure of all six ignition coils. The dealer inspected it and determined that coils 3 and 5 were corroded, and had failed then shorted, taking the fuse that controls all six. He said he expects to see this from...

I removed all the screws the manual mentions. However the bumper feels very very firmly attached above and rear of the headlights. Way harder pull than the rear bumper required. There's a black plastic piece there that looks like the one on the back, but it won't just pull off. Left side...

How do I get it open again? NM, I found the emergency release on this forum. Phew

How do I make sure the airbags don't deploy? Disconnect the battery? Disconnect the airbag ECU? I'm just starting to pull the car apart and don't want the airbags going off. Please help. The manual isn't much of one.

I'm waiting for my car to arrive any day now but I want to make sure I have the necessary tools on hand. What heads do the fasteners and bolts have? Torx? Hex head (assuming metric as they're listed as M5,6,10,etc)? It looks like there are a few self tapping screws as well which could have any...

Just that. Looking to figure out what all the exposed bits of the shifter are made of.

I'm trying to figure out what to go with for exhaust tips. I had wanted dark green titanium but apparently that's too hard to hit consistently. I can swap with someone who has the black pack and get black ones, but given I'm changing the stock splitter and sills, and diffuser surround, and...

The stock floor mats don't reach up behind the pedals nor up the back of the passenger footwell. So I commissioned Brad at Hide and Seam to make a set for me. They're made to look OEM except longer, and I asked him to use yellow stitching to match the interior of my car. They look great, but...

Offer is open until further notice. Email sales@bag-world.co and tell them what set you want, your name, forum handle, address, etc. And please keep us updated here with your order. Forum Members, Bagworld Surman Bespoke has done some custom bags for an Emira owner. They've said that if we did...

What do you use to clean and protect the engine bay and visible components?

I have badges from @GRP to stick on my Signature Wheels center caps. The caps are flat and powdercoated. Is there anything else I need to do besides stick the badges on? Additional adhesive?

I have a tight garage space that I need to fit the Emira and am suv in. I was thinking of using these to tuck the Emira away for off season storage. What does anyone think...

Can someone with an Emira please open their key and do a non-destructive teardown with pictures and perhaps measurements? Is it just a screw and a coin battery attached to a small transmitter?

Has anyone managed to hack / mod the infotainment? I think it would be cool to inject a picture of our own spec into the startup instead of the silhouette.

Can someone please take a photo and measurement of the door sill near the intake? I'm looking for a measurement from the swoop on the front to the intake at the edge of the car. Or if you can reach / see it, from the back of the door sill panel edge that's under the intake to the edge of the...

I'm looking for a vector graphic of the Lotus font for my incoming car. Does anyone here have this? Just the text in a straight line.

Has anyone looked at getting this painted or powder coated so it's not silver? I think it'll detract from the black wheels and yellow calipers. In the images I've seen it's great with the silver or diamond cut wheels, but doesn't look great with black.

I'm looking for the parts that make up the door sill / rocker panel. Basically all of the black below the body colored door. Is this one piece or several? I got this parts list from B&C but it's difficult to make out. As best as I can tell from the manual (page 10-18) it's a lower rocker...

Update: For those interested, I can get you member reduced pricing. Just send me a DM and I'll get you a discount through them. I've decided to go with Signature Wheels in SV104 in a satin black. They're waiting until they have a car they can reference to adjust the concavity of the wheel...

I saw this in ta YouTube video of someone showing off their Emira. On either side of the firewall window there are snap on covers that look like the ones used for attaching car seats. Anyone know what these are for? Luggage restraints maybe? Sorry I don't have a picture.

Is anyone here getting aftermarket wheels are planning on selling their stock ones? I'm looking to buy a set of black lightweight v spoke takeoffs.

I'm trying to get a single can of Hethel Yellow spray paint from the UK to the US. Can anyone here help? I know it's going to be slow, expensive, and complicated but I can't buy it here so shipping is the only option.

I'm reading the manual and it says it requires E10 (95 RON) at a minimum and E5 (97 RON) is recommended. The E ratings appear to be octane equivalents of 94 and 97. And the RON ratings are 91 / 94 octane. So what's appropriate to use? In California I can't purchase above 91.

Does anyone know how the rocker panels are attached? Are they glued or screwed?