Check out these babies!!

[beefeater]

@T6061 @crestima
View attachment 85768

@675430VME, I had @crestima logged as side badges only

 

[OliverB]

@Eagle7 maybe it’s just me, but it looks like the gap between the flag and the letter O is a tiny bit shorter compared to the other side?

Oh and can I keep the silver edges?

I’m sorry this is last minute

 

[Eagle7]

@Eagle7 maybe it’s just me, but it looks like the gap between the flag and the letter O is a tiny bit shorter compared to the other side?

Oh and can I keep the silver edges?

I’m sorry this is last minute

View attachment 85789

That may have been an earlier work-in-progress version. Here's what it looks like for the PDF file I sent to @675430VME. Due to how different these elements line up compared to which side of the car it's on, I made an artistic judgement to make the gap between the flag and the letter B on the right side badge, to be approximately the same as the gap between the flag and the O on the left side badge. The right side lines up nicely because of the way the A in EMIRA matches the leading edge slant of the badge. It's a judgement call on how to line things up on the left side badge, but I can make whatever adjustment you like if there's still time.

And yes, all these graphic designs are meant to fit within the standard aluminum badge frame.

 

[Eagle7]

@675430VME Here's the pdf file as above for Oliver B.

 

[Eagle7]

Not to hijack, but has anyone come up with a vinyl sticker to cover up the seatbelt warning labels on the sun visors?

What kind of a graphic would you want? Something fancy? Plain? Simple?

 

[Eagle7]

Maybe something understated like this? You would mount it so that to you sitting in the seat, it would look upside down, but when the flaps are lowered the lettering would be right-side up.

 

[itspbjtime]

Damn how did I miss this entire thread? I’d be interested in any future buys, if possible. I’d also be interested in that visor label cover if that one gets off the ground.

 

[Eagle7]

Damn how did I miss this entire thread? I’d be interested in any future buys, if possible. I’d also be interested in that visor label cover if that one gets off the ground.

The visor cover could be done easily by any local auto vinyl sign printing service. Just print on matte black vinyl. I can post up the printable file if you like that design.

 

[OliverB]

That may have been an earlier work-in-progress version. Here's what it looks like for the PDF file I sent to @675430VME. Due to how different these elements line up compared to which side of the car it's on, I made an artistic judgement to make the gap between the flag and the letter B on the right side badge, to be approximately the same as the gap between the flag and the O on the left side badge. The right side lines up nicely because of the way the A in EMIRA matches the leading edge slant of the badge. It's a judgement call on how to line things up on the left side badge, but I can make whatever adjustment you like if there's still time.

And yes, all these graphic designs are meant to fit within the standard aluminum badge frame.

View attachment 85795

Thank you! <3

 

[beefeater]

And yes, all these graphic designs are meant to fit within the standard aluminum badge frame.

@Eagle7 , not sure I read this correctly. Do you mean all the designs are supposed to have the silver edge? I thought those were designed to be frameless?
@675430VME

 

[Eagle7]

@Eagle7 , not sure I read this correctly. Do you mean all the designs are supposed to have the silver edge? I thought those were designed to be frameless?
@675430VME

Yes, they fit in the standard frame, unless the vendor can make them a single piece. I suppose he could if requested. I wonder if that would be a separate charge.

 

[675430VME]

Yes, they fit in the standard frame, unless the vendor can make them a single piece. I suppose he could if requested. I wonder if that would be a separate charge.

Vendor can do frameless and I thought that was what most of you guys want from the previous comments. Was that not the case?
The graphic I posted for each of you will be exactly that on the actual items so if anyone wants a frame on his/her, please say so.
@Eagle7

Right now I only have 2 people who want frames on theirs and they are @Orchardbike and @beefeater. Everybody else is frameless.

 

[Eagle7]

Vendor can do frameless and I thought that was what most of you guys want from the previous comments. Was that not the case?
The graphic I posted for each of you will be exactly that on the actual items so if anyone wants a frame on his/her, please say so.
@Eagle7

Right now I only have 2 people who want frames on theirs and they are @Orchardbike and @beefeater. Everybody else is frameless.

I want mine in the standard frame too.

 

[crestima]

@675430VME, I had @crestima logged as side badges only

Vendor can do frameless and I thought that was what most of you guys want from the previous comments. Was that not the case?
The graphic I posted for each of you will be exactly that on the actual items so if anyone wants a frame on his/her, please say so.
@Eagle7

Right now I only have 2 people who want frames on theirs and they are @Orchardbike and @beefeater. Everybody else is frameless.

No, I want with frame, I was under the impression that all of them were being produced with the OEM frame and that the designs displayed represented only the badge that was to go in the frame. Regardless, I do want mine with the silver frame to match the silver letters. Also, please not that I only ordered external side badges, no dash badge for me.

 

[Eagle7]

No, I want with frame, I was under the impression that all of them were being produced with the OEM frame and that the designs displayed represented only the badge that was to go in the frame. Regardless, I do want mine with the silver frame to match the silver letters. Also, please not that I only ordered external side badges, no dash badge for me.

Yeah that was my intent with the designs, that they would fit inside the standard aluminum frame. It didn't occur to me that anyone wanted them frameless, but if some do that's okay too. My concern was to protect the edges from chipping from wear and tear, but if they're strong enough that's fine for those who want them that way.

It might be good to check with everybody first in case others assumed they would be framed too.

 

[crestima]

Yeah that was my intent with the designs, that they would fit inside the standard aluminum frame. It didn't occur to me that anyone wanted them frameless, but if some do that's okay too. My concern was to protect the edges from chipping from wear and tear, but if they're strong enough that's fine for those who want them that way.

It might be good to check with everybody first in case others assumed they would be framed too.

I also presumed that the frame was necessary, not only to protect the edges, but also because the frame and its backing is where the 2 setting pins are attached to.

 

[Eagle7]

Damn how did I miss this entire thread? I’d be interested in any future buys, if possible. I’d also be interested in that visor label cover if that one gets off the ground.

I don't know if there's still time to add another person. Look through the designs that have been submitted and pick one. @675430VME can we add one more?

 

[crashprash]

@crashprash
View attachment 85763

I would like the frame as well in the same shade of gold

 

[Bond_42]

Silver framed for me. Thanks again guys!

 

[Eagle7]

Here's what they'll look like in the frame:

I would like the gold-colored frame too, same gold as the badges if that's possible. The dash badge can keep the black frame.