Carbon fiber bits

[Aerie]

View attachment 33579
Today, we installed our cutting-edge Aerie Performance High-Flow Carbon Fiber Intake System on our development car, the Emira V6. We are delighted to share the fitment results with you, which can be seen in the attached picture.
View attachment 33583
View attachment 33582View attachment 33584

Good news, our carbon fiber intake system for Emira V6 will be stock available with reliable cost rate . we will update the details….

 

[Bilbao-Emira]

A few shots of my Emira posted by @Aerie on Instagram:

 

[Davebeats]

Another manufacture of a carbon kit out of the UK

Emira

https://automotivepassion.net/wp-content/uploads/2024/05/Emira-video-15_05_24-1.mp4

automotivepassion.net

 

[08fordgt]

We manufacture direct replacement carbon fiber parts using pre-preg autoclaved composite. We have our own Emira V6 development car for molding and test fitment, so we do not require existing factory parts from customers. This approach saves a significant amount of cost and reduces the development timeframe.

Regarding the carbon fiber engine cover for Emira V6, we are currently assessing the production cost. We will provide you with the shipping cost as soon as possible, along with any ground buy discount offers.

Currently, we offer the following products for Emira
- Full titanium exhaust for Emira V6 & 2.0
- Titanium de-cat pipe V6 & 2.0
- V6 y-pipe
- V6 header
- 2.0 high-flow sport catalyst straight pipe
- Lightweight alloy forged wheels
- 2.0 carbon fiber engine cover
- Carbon fiber Diffuser surround for Emira V6

Additionally, we will soon introduce a high-flow carbon fiber intake system and a short shifter.

We are also in the process of developing carbon fiber front splitter, front access panel, mirror (replacement ) side skirts, rear wings, and a louvered tailgate. These products are currently being planned for release.

I don't see the 2.0 high flow cat on your site.

 

[leofin]

Did a hydro dipping, in carbon look for some engine parts recently. Pretty awesome result, can recommend that option too.

 

[Porter]

Apologies if I missed it earlier, but has anyone else seen these Automotive Passion carbon bits? The little mudflap pieces are actually quite interesting, I get all kinds of stuff kicked up by my front tires into the lower side vents.

Emira

https://automotivepassion.net/wp-content/uploads/2024/05/Emira-video-15_05_24-1.mp4

automotivepassion.net

 

[BobbyG]

Apologies if I missed it earlier, but has anyone else seen these Automotive Passion carbon bits? The little mudflap pieces are actually quite interesting, I get all kinds of stuff kicked up by my front tires into the lower side vents.

Emira

https://automotivepassion.net/wp-content/uploads/2024/05/Emira-video-15_05_24-1.mp4

automotivepassion.net

News to me.

I like the subtle effect and appearance.

My Evora400 flaps caught a lot of junk.

Seems like a simple install.

I’ll ponder a purchase

 

[Go Kart]

Apologies if I missed it earlier, but has anyone else seen these Automotive Passion carbon bits? The little mudflap pieces are actually quite interesting, I get all kinds of stuff kicked up by my front tires into the lower side vents.

Emira

https://automotivepassion.net/wp-content/uploads/2024/05/Emira-video-15_05_24-1.mp4

automotivepassion.net

Yep, someone posted a pretty good install video a couple pages back.



… and there’s a thread about them here:
https://www.emiraforum.com/threads/arch-guards-mudflaps-anyone-have-these-installed.4497/

 

[Liquid Hot Magma]

Apologies if I missed it earlier, but has anyone else seen these Automotive Passion carbon bits? The little mudflap pieces are actually quite interesting, I get all kinds of stuff kicked up by my front tires into the lower side vents.

Emira

https://automotivepassion.net/wp-content/uploads/2024/05/Emira-video-15_05_24-1.mp4

automotivepassion.net

Porter, FYI @Vampyre started a thread about these here:

Arch Guards / Mudflaps - anyone have these installed?

 

[Climber]

View attachment 42139
We have a Emira OEM moulded version front spitter arrived are you interesting on it

Haven’t looked at the form in a while…
Could you provide me with contact information… really interested in purchasing one of these.

Thanks Climber

 

[Time2Fly]

View attachment 42139
We have a Emira OEM moulded version front spitter arrived are you interesting on it

@Aerie I haven't seen this. It's a reduced width splitter than your other one or it replaces the stock black part and your splitter goes under it?

 

[Aerie]

Haven’t looked at the form in a while…
Could you provide me with contact information… really interested in purchasing one of these.

Thanks Climber

[email protected]

 

[Porter]

View attachment 42139
We have a Emira OEM moulded version front spitter arrived are you interesting on it

Nice, is this a direct replacement? Or a cover?

 

[Aerie]

Nice, is this a direct replacement? Or a cover?

Direct replacement parts .

 

[Liquid Hot Magma]

Direct replacement parts .

@Aerie do you have installation instructions for this? I’m also interested, but I’d like to know how involved the process is to replace this part, before making a decision. I’ve inspected this area quite thoroughly on demo cars, and can’t see how this piece is removed without removing the entire front bumper.

 

[Time2Fly]

@Aerie do you have installation instructions for this? I’m also interested, but I’d like to know how involved the process is to replace this part, before making a decision. I’ve inspected this area quite thoroughly on demo cars, and can’t see how this piece is removed without removing the entire front bumper.

Great question. In the service manual I only see the front bumper. No splitter removal

 

[Liquid Hot Magma]

Great question. In the service manual I only see the front bumper. No splitter removal

I wouldn’t order this part blindly until I knew the installation procedure. From what I’ve been advised by a Lotus tech, the front bumper removal and re-installation is a 2.75 hr job alone. Yes, nearly 3 hours to remove and replace the front bumper. That is a costly labour amount to replace this one piece, so I would prefer to install this part myself. If Aerie knows how to replace this part without removing the entire front bumper, I’d really like to know.

@Aerie can you please advise us on how to replace this part? Is it simple enough to explain here, or can you provide pictures to show how it is installed? Others are also waiting to hear back, and I’m sure they are holding off on placing an order until we find out what the installation procedure is like.

 

[SONOFEMERY]

Is there an index of carbon fiber stuff? I might try to put it together if it hasn't been done yet. I'm looking to get some nice OEM+ stuff, but unsure what's been discussed or linked here as this thread is pretty long. Also unsure if there are examples of the various bits on cars to see it installed. Especially interested in finding someone to offer new center console trim (around the shifter area) as I don't love the piano black or the "aluminum" trim.

 

[VL3X]

Is there an index of carbon fiber stuff? I might try to put it together if it hasn't been done yet. I'm looking to get some nice OEM+ stuff, but unsure what's been discussed or linked here as this thread is pretty long. Also unsure if there are examples of the various bits on cars to see it installed. Especially interested in finding someone to offer new center console trim (around the shifter area) as I don't love the piano black or the "aluminum" trim.

This thread is basically it. No formal index has been created.

 

[Jincook]

Here’s a good walk around video of the complete kit

Hi, did you lowered your car ? Or put spacer ? It looks really good. I'm also looking for carbon kit and not sure about lowering since LA road is just horrible.