Nannies - who drove a 2026 car and can tell?

Foxy87

Emira Fiend
Joined
Mar 20, 2023
Messages
510
Media
54
Reaction score
446
Status:
Emira Owner
My Specs:
Emira V6
Hey

I will get my Emira supposably in April/May. I didnt spec the „extended co drivers package“ (its an option in europe) but will have the co driver package as standard which includes the following nannies:

- Autonomous Emergency Braking (AEB)
- Traffic sign recognition
- Blind spot warning system
- Lane change assist
- Lane departure warning
- Fatigue detection/warning

I am very curious how Lotus implemented these (how annoying these are) and how easy it is to disable them (shortcut or deep within the menues). I am finde with the AEB and the Blind spot warning. I hate traffic sign recognition and speed warner.

So is there anybody who has driven a 2026 car and paid attention to these?

Thanks
 
I’d be amazed if they do that. 1. They haven’t got any money. 2. Developing different software for different countries would cost a lot. 3. As it’s deemed a safety feature, they’re unlikely to develop something that is deemed to be ‘less safe’.
I am surprised it's not already been developed, since it most likely comes from Volvo. Why are they recreating the wheel? Just use the software from Volvo and tweak it to fit the Lotus display.
 
You should be able to disable through the quick panel
If you can show me specifically. What I found in the quick panel, you can only change it from sound & display or display only. You have to go into the menus to disable it and confirm it.
 
Where did you send this letter? Post what you sent, and we all can send the same in hopes they get the message.
This is my letter. I sent it to a Lotus field service engineer and he said he'd forward to the right people. I don't want to post his email here for everyone to see without his permission. But If anyone types up a letter for this specific issue, send me a private message and i'll give you the email. He told me that they need customer feedback regarding the ADAS system.

"Dear Lotus Cars Engineering Team,

I recently took delivery of a 2026 Lotus Emira (having previously owned a 2024 model), and I want to begin by saying how much I genuinely enjoy the car. The Emira continues to embody the driver-focused character that drew me to the brand in the first place.

I am writing to share constructive feedback regarding the new ADAS system. I understand that many of the changes were implemented to comply with European regulatory requirements. However, as a U.S. customer, I am finding certain aspects of the system to be overly intrusive in daily driving.

In particular, the flashing speed warning icon that appears when exceeding the detected speed limit—even by a minimal amount—is highly distracting. The flashing element consistently draws my eyes away from the road to the instrument cluster. Compounding the issue, the traffic sign recognition system does not always correctly identify the applicable speed limit, which results in flashing warnings when I am not actually speeding. This creates unnecessary distraction and undermines driver confidence in the system.

Ideally, I would greatly appreciate a software update that allows customers to:
  • Permanently disable certain ADAS features so that settings do not reset at startup (USA).
  • Turn Traffic Sign Recognition fully “Off” (not just “Visual Only”) from the quick menu
  • Disable the flashing component of the speed limit warning, even if the visual indicator remains
At a minimum, removing the flashing behavior of the speed warning would significantly improve the driving experience.

I share this feedback respectfully and in the spirit of support for the brand. Within the Lotus community, these ADAS behaviors have become a frequent topic of discussion, and many prospective buyers are expressing hesitation about the 2026 model year due to these concerns. A software-based refinement would go a long way toward reinforcing goodwill among enthusiast customers while maintaining regulatory compliance where required.

I truly appreciate the continued commitment of Lotus Cars to building engaging sports cars, and I hope you will consider this request as an opportunity to further refine an already excellent vehicle.

Thank you very much for your time and consideration."
 
I really really hope somebody developes a memory box. My car should arrive in 1-2 months and honestly this really dampens the joy…
 
This is my letter. I sent it to a Lotus field service engineer and he said he'd forward to the right people. I don't want to post his email here for everyone to see without his permission. But If anyone types up a letter for this specific issue, send me a private message and i'll give you the email. He told me that they need customer feedback regarding the ADAS system.

"Dear Lotus Cars Engineering Team,

I recently took delivery of a 2026 Lotus Emira (having previously owned a 2024 model), and I want to begin by saying how much I genuinely enjoy the car. The Emira continues to embody the driver-focused character that drew me to the brand in the first place.

I am writing to share constructive feedback regarding the new ADAS system. I understand that many of the changes were implemented to comply with European regulatory requirements. However, as a U.S. customer, I am finding certain aspects of the system to be overly intrusive in daily driving.

In particular, the flashing speed warning icon that appears when exceeding the detected speed limit—even by a minimal amount—is highly distracting. The flashing element consistently draws my eyes away from the road to the instrument cluster. Compounding the issue, the traffic sign recognition system does not always correctly identify the applicable speed limit, which results in flashing warnings when I am not actually speeding. This creates unnecessary distraction and undermines driver confidence in the system.

Ideally, I would greatly appreciate a software update that allows customers to:
  • Permanently disable certain ADAS features so that settings do not reset at startup (USA).
  • Turn Traffic Sign Recognition fully “Off” (not just “Visual Only”) from the quick menu
  • Disable the flashing component of the speed limit warning, even if the visual indicator remains
At a minimum, removing the flashing behavior of the speed warning would significantly improve the driving experience.

I share this feedback respectfully and in the spirit of support for the brand. Within the Lotus community, these ADAS behaviors have become a frequent topic of discussion, and many prospective buyers are expressing hesitation about the 2026 model year due to these concerns. A software-based refinement would go a long way toward reinforcing goodwill among enthusiast customers while maintaining regulatory compliance where required.

I truly appreciate the continued commitment of Lotus Cars to building engaging sports cars, and I hope you will consider this request as an opportunity to further refine an already excellent vehicle.

Thank you very much for your time and consideration."
I have sent an email to help petition this. Hopefully, they will change it so the last chosen option stays upon restart.
 
Hi everyone,
Do send a DM to bimmernate for the email to send to lotus. I got this reply. The more people to send the request for change, it just might happen.

Reply: Thank you for the feedback and I have escalated to the factory.
 
IMG_4902.webp

Finally took delivery of my 2026, drove 250 mi so far. Turning the nannies off at startup does take a 3-4 screens and clicks, but becomes an accepted routine.

I tried driving without turning it off and it’s tolerable. However the speed limit warning is definitely a liability, not because it’s a nuisance, but because it’s completely inaccurate on a regular basis. As seen in the pic, looks like I’m driving dangerously slow!
 
View attachment 80270
Finally took delivery of my 2026, drove 250 mi so far. Turning the nannies off at startup does take a 3-4 screens and clicks, but becomes an accepted routine.

I tried driving without turning it off and it’s tolerable. However the speed limit warning is definitely a liability, not because it’s a nuisance, but because it’s completely inaccurate on a regular basis. As seen in the pic, looks like I’m driving dangerously slow!
I experience this wildly inaccurate speed warning too. I don't understand why it's only using site of the sign to gauge speed. Why doesn't it use GPS together with site? My BMW never shows wrong speed.

Do you know you can use the short cut drop down to turn the speed warning to display only. 2 taps.
 
View attachment 80270
Finally took delivery of my 2026, drove 250 mi so far. Turning the nannies off at startup does take a 3-4 screens and clicks, but becomes an accepted routine.

I tried driving without turning it off and it’s tolerable. However the speed limit warning is definitely a liability, not because it’s a nuisance, but because it’s completely inaccurate on a regular basis. As seen in the pic, looks like I’m driving dangerously slow!
Firstly, congrats!
Maybe Lotus screwed up and yours was really meant for delivery to Germany?
IMG_2905.webp
 
I experience this wildly inaccurate speed warning too. I don't understand why it's only using site of the sign to gauge speed. Why doesn't it use GPS together with site? My BMW never shows wrong speed.

Do you know you can use the short cut drop down to turn the speed warning to display only. 2 taps.
Yes the drop down is convenient. I was just experimenting with different settings.

I understand lotus implemented this to comply with euro regulations, but I would think a poorly vetted system is even more of a liability to them. Hopefully they will just come up with a software update to deactivate as a fixed setting in the US if the user chooses.

Otherwise the car drives amazing, better than I hoped. Looks, sounds, power delivery, shifter feel, handling, I couldn’t be happier.
 
View attachment 80270
Finally took delivery of my 2026, drove 250 mi so far. Turning the nannies off at startup does take a 3-4 screens and clicks, but becomes an accepted routine.

I tried driving without turning it off and it’s tolerable. However the speed limit warning is definitely a liability, not because it’s a nuisance, but because it’s completely inaccurate on a regular basis. As seen in the pic, looks like I’m driving dangerously slow!
Driving without turning off the nannies isn't tolerable at all. 1mph over the speed MPH and it starts beeping at you. In the US, everyone consistently drives at least 5mph over the limit.

There are two aspects of the nannies that MUST be addressed at every drive. The traffic sign recognition and lane change assist. They each can be turned to "visual only" or fully shut off.

Traffic sign recognition turned to visual only is still annoying because the somewhat large speed limit indicator just flashes on the dash which is super distracting and dangerous. I always turn traffic sign recognition to OFF (not just visual only). This can be done from the quick menu.

Lane change departure must be turned to visual only or fully off. If you don't, it will beep every time you get close to a line, and other random times when it thinks you are near a line. I've had other 2026 owners wonder why their music keeps cutting out, and it is because of the lane change departure warning not being set on visual only or off. I turn lane change departure to visual only every drive. This can only be done from a deeper menu which is annoying. It should be available in the quick menu. Currently, you can only fully shut off lane departure in the quick menu, and as a consequence, you get a yellow dash light. There is no yellow dash light with visual only.

Lotus has implemented this system pretty poorly. All it takes is a software update to fix it, but who knows if they will.
 
Yes the drop down is convenient. I was just experimenting with different settings.

I understand lotus implemented this to comply with euro regulations, but I would think a poorly vetted system is even more of a liability to them. Hopefully they will just come up with a software update to deactivate as a fixed setting in the US if the user chooses.

Otherwise the car drives amazing, better than I hoped. Looks, sounds, power delivery, shifter feel, handling, I couldn’t be happier.
So there have been a bunch of us who have sent this letter to Lotus in hopes that they will change it for the USA. I will DM his email if you'd like to add to the petition/ask.

HI Ryan,
I am adding another to the petition. I was given this by another Lotus owner and wanted to say many have the same feedback on the ADAS in the USA. Hopefully, there will be an update to provide a way for it to stay in the state last chosen.

Dear Lotus Cars Engineering Team,

I recently took delivery of a 2026 Lotus Emira (having previously owned a 2024 model), and I want to begin by saying how much I genuinely enjoy the car. The Emira continues to embody the driver-focused character that drew me to the brand in the first place.

I am writing to share constructive feedback regarding the new ADAS system. I understand that many of the changes were implemented to comply with European regulatory requirements. However, as a U.S. customer, I am finding certain aspects of the system to be overly intrusive in daily driving.

In particular, the flashing speed warning icon that appears when exceeding the detected speed limit—even by a minimal amount—is highly distracting. The flashing element consistently draws my eyes away from the road to the instrument cluster. Compounding the issue, the traffic sign recognition system does not always correctly identify the applicable speed limit, which results in flashing warnings when I am not actually speeding. This creates unnecessary distraction and undermines driver confidence in the system.

Ideally, I would greatly appreciate a software update that allows customers to:

  • Permanently disable certain ADAS features so that settings do not reset at startup (USA).
  • Turn Traffic Sign Recognition fully “Off” (not just “Visual Only”) from the quick menu
  • Disable the flashing component of the speed limit warning, even if the visual indicator remains
At a minimum, removing the flashing behavior of the speed warning would significantly improve the driving experience.

I share this feedback respectfully and in the spirit of support for the brand. Within the Lotus community, these ADAS behaviors have become a frequent topic of discussion, and many prospective buyers are expressing hesitation about the 2026 model year due to these concerns. A software-based refinement would go a long way toward reinforcing goodwill among enthusiast customers while maintaining regulatory compliance where required.

I truly appreciate the continued commitment of Lotus Cars to building engaging sports cars, and I hope you will consider this request as an opportunity to further refine an already excellent vehicle.

Thank you very much for your time and consideration.
 
So there have been a bunch of us who have sent this letter to Lotus in hopes that they will change it for the USA. I will DM his email if you'd like to add to the petition/ask.

HI Ryan,
I am adding another to the petition. I was given this by another Lotus owner and wanted to say many have the same feedback on the ADAS in the USA. Hopefully, there will be an update to provide a way for it to stay in the state last chosen.

Dear Lotus Cars Engineering Team,

I recently took delivery of a 2026 Lotus Emira (having previously owned a 2024 model), and I want to begin by saying how much I genuinely enjoy the car. The Emira continues to embody the driver-focused character that drew me to the brand in the first place.

I am writing to share constructive feedback regarding the new ADAS system. I understand that many of the changes were implemented to comply with European regulatory requirements. However, as a U.S. customer, I am finding certain aspects of the system to be overly intrusive in daily driving.

In particular, the flashing speed warning icon that appears when exceeding the detected speed limit—even by a minimal amount—is highly distracting. The flashing element consistently draws my eyes away from the road to the instrument cluster. Compounding the issue, the traffic sign recognition system does not always correctly identify the applicable speed limit, which results in flashing warnings when I am not actually speeding. This creates unnecessary distraction and undermines driver confidence in the system.

Ideally, I would greatly appreciate a software update that allows customers to:

  • Permanently disable certain ADAS features so that settings do not reset at startup (USA).
  • Turn Traffic Sign Recognition fully “Off” (not just “Visual Only”) from the quick menu
  • Disable the flashing component of the speed limit warning, even if the visual indicator remains
At a minimum, removing the flashing behavior of the speed warning would significantly improve the driving experience.

I share this feedback respectfully and in the spirit of support for the brand. Within the Lotus community, these ADAS behaviors have become a frequent topic of discussion, and many prospective buyers are expressing hesitation about the 2026 model year due to these concerns. A software-based refinement would go a long way toward reinforcing goodwill among enthusiast customers while maintaining regulatory compliance where required.

I truly appreciate the continued commitment of Lotus Cars to building engaging sports cars, and I hope you will consider this request as an opportunity to further refine an already excellent vehicle.

Thank you very much for your time and consideration.
Yes please send me his email thx
 
Driving without turning off the nannies isn't tolerable at all. 1mph over the speed MPH and it starts beeping at you. In the US, everyone consistently drives at least 5mph over the limit.

There are two aspects of the nannies that MUST be addressed at every drive. The traffic sign recognition and lane change assist. They each can be turned to "visual only" or fully shut off.

Traffic sign recognition turned to visual only is still annoying because the somewhat large speed limit indicator just flashes on the dash which is super distracting and dangerous. I always turn traffic sign recognition to OFF (not just visual only). This can be done from the quick menu.

Lane change departure must be turned to visual only or fully off. If you don't, it will beep every time you get close to a line, and other random times when it thinks you are near a line. I've had other 2026 owners wonder why their music keeps cutting out, and it is because of the lane change departure warning not being set on visual only or off. I turn lane change departure to visual only every drive. This can only be done from a deeper menu which is annoying. It should be available in the quick menu. Currently, you can only fully shut off lane departure in the quick menu, and as a consequence, you get a yellow dash light. There is no yellow dash light with visual only.

Lotus has implemented this system pretty poorly. All it takes is a software update to fix it, but who knows if they will.
Really feel for you guys with the nannies, particularly because it's the wrong kind of nanny ;).
I'm pretty sure I'm not the first to have thought of this, but if the nanny wiring happens to be fused independently from any other important accessory, and if doing this wouldn't trigger limp mode, could a simple removal of that fuse resolve the issue? If this is indeed possible (and I have a feeling it's not), I'd rather live with a warning light on the dash than the crazy nanny alerts or having to disable them prior to each drive.
 
Really feel for you guys with the nannies, particularly because it's the wrong kind of nanny ;).
I'm pretty sure I'm not the first to have thought of this, but if the nanny wiring happens to be fused independently from any other important accessory, and if doing this wouldn't trigger limp mode, could a simple removal of that fuse resolve the issue? If this is indeed possible (and I have a feeling it's not), I'd rather live with a warning light on the dash than the crazy nanny alerts or having to disable them prior to each drive.
Screen Shot 2026-04-19 at 1.39.47 PM.webp

Screen Shot 2026-04-19 at 1.42.24 PM.webp

I suppose that is something to try. Looks like fuse in location 66 in passenger footwell box
 

Create an account or login to comment

Join now to leave a comment enjoy browsing the site ad-free!

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top