Sticking badges to center caps

[Time2Fly]

I have badges from @GRP to stick on my Signature Wheels center caps. The caps are flat and powdercoated. Is there anything else I need to do besides stick the badges on? Additional adhesive?

 

[GRP]

Just clean the surface with alcohol or similar and stick em!
If its cold where you are use a hair dryer or heat gun to warm them up for optimum adhesion.

 

[Time2Fly]

Thanks, Greg.

Do you recommend a bead of silicone caulk around the inside edge to lock them in place? They have o rings which are pretty snug.

 

[GRP]

Thanks, Greg.

Do you recommend a bead of silicone caulk around the inside edge to lock them in place? They have o rings which are pretty snug.

Not a bad idea on the backside of the caps to do that. Is will ensure they don’t pop loose until you want them to!

 

[Time2Fly]

 

[T6061]

View attachment 40548

SV104? Stock size and offset? Weight savings?

 

[Time2Fly]

SV104? Stock size and offset? Weight savings?

SV104 +7 in the back and +5 in the front. Overall weight savings 23lbs iirc. It could have been another two pounds lighter but I went with the reinforcing ring.

 

[T6061]

SV104 +7 in the back and +5 in the front. Overall weight savings 23lbs iirc. It could have been another two pounds lighter but I went with the reinforcing ring.

How much longer before we see them on your car?

 

[Time2Fly]

How much longer before we see them on your car?

Two months yet. Production date is now lunchtime on the 15th of May.

 

[T6061]

Two months yet. Production date is now lunchtime on the 15th of May.

Look forward to seeing it!