Emira Full Handbook

[cyanmauve]

Thank you for your hard work, I am happy to pay upfront and have no expectation for you to front your personal money.

Tell me where to send the money and I will!

 

[Time2Fly]

Same @Martylemoo let me know and I'll send you $$

 

[ADC]

Cheers for going to all this effort @Martylemoo
Happy to send through some money in advance if you PM details. Will include a little extra so you can buy yourself a thankyou beer 🍻

 

[308tr6]

Way late to this discussion, and kudos to the gentlemen putting this all together, but curious if there is a link to the PDF of the service manual (not the general handbook)? Sorry if this is a dumb question - I didn't research this thread and related posts.

 

[Time2Fly]

Way late to this discussion, and kudos to the gentlemen putting this all together, but curious if there is a link to the PDF of the service manual (not the general handbook)? Sorry if this is a dumb question - I didn't research this thread and related posts.

Check the Emira discord. It's linked at the top.

 

[MikeR]

Happy to pay ££s in advance too.

 

[robrmon]

Thank you for your hard work, I am happy to pay upfront and have no expectation for you to front your personal money.

Tell me where to send the money and I will!

Fully agree thanks @Martylemoo

 

[brainf18]

Good morning all, sorry for the radio silence, I have been very busy with work. I am looking to wrap this up to finalise the orders. For clarity there is no US version that I have produced, at the moment everything printed is the UK version. That being said I really cannot see there be much difference other than the side of the steering wheel.I have not ordered any US versions as I don’t have a PDF without writing all across every page preventing printing. The USA next to your name denotes the delivery and price not the version of manual.
If you are on this list and do not wish to have the UK version then please remove yourself, I will leave it open for 48 hours whilst I negotiate the spine design with the printer.

I am going to run with the Workshop Manual as per the proof, ring binder just gets too complicated with the size.

Final price including shipping is as follows:-

Workshop Manual :- 65GBP 95USD 165AUD
User Manual:- 20GBP 37USD 60AUD

Bigglesofnorwich Workshop Manual UK 65GBP
Tony G Workshop Manual UK 65GBP
Whitey Workshop Manual UK 65GBP
MikeR Workshop Manual UK 65GBP
Motorpool Workshop and User Manual USA $132
Turbotamba Workshop and User Manual AUS $225AUD
Brain F18 User Manual USA $37
Time2Fly Workshop Manual (custom cover Price TBC)USA $TBC
Glyn V6 Workshop Manual and User Manual
Porter Workshop Manual USA $95
Squish Workshop Manual USA $95
Blackthought User Manual USA $37
ADC User and Workshop Manual UK 85GBP
Speedy Emira Workshop Manual UK 65GBP
Rapture User Manual US $37
Silent Cilantro Workshop and User Manual USA $132
NigeT Workshop Manual UK 65GBP
Nick Sticks Workshop Manual UK 65GBP
Xroyalnavy User and Workshop Manual USA $132
Emirahouston User and Workshop Manual USA $132
Lovora User and Workshop Manual USA $132
KaizokuCoder User and Workshop Manual USA $132
Robrman User and Workshop Manual USA $132
TonyGcar User and Workshop Manual UK 85GBP
Shahaf2911 Workshop Manual Italy (shipping TBC)
Liquid User and Workshop Manual USA $132
Black Lotus User and Workshop Manual USA $132
Netsinah User and Workshop Manual USA $132
NeilD User and Workshop Manual UK 85GBP
Benjh1028 User and Workshop Manual USA $132
Manofsteel User and Workshop Manual USA $132
Cyanmauve User and Workshop Manual USA $132
Bif User Manual USA $37


I make that a total of 29x Workshop Manuals and 21x User Manual

This is a lot of cash now, I do not expect people to pay me until I have them in hand but I do hope people honour their orders. I have had nothing but good things from this forum so I have faith.

I will run a couple of spares in case of loss in post etc

Time from order to production is around 21 days so once I know they are on their way to me I will organise payment details and shipping addresses etc.

I appreciate the effort...But if you do not have the US version then please remove me from the list. thanks

 

[Martylemoo]

I appreciate the effort...But if you do not have the US version then please remove me from the list. thanks

Done, I may produce it at a later date if I get a clean PDF but at the moment I want to clear this lot up first.

 

[netsinah]

I’d also prefer the Canadian (US) versions, so I’ll pass for now. Thanks again though for your +++ generous help on this.

 

[Stiffarm]

I would like a Workshop and User manual. USA please.

Too would like a USA workshop and user manual. Thanks.

 

[blacklotus]

I’d also prefer the Canadian (US) versions, so I’ll pass for now. Thanks again though for your +++ generous help on this.

I am going to pass on the user manual as I would like the US version, but will keep the service manual for my order.

Thanks again for doing this for the community.

 

[silent cilantro]

@Martylemoo same here, if it’s not too late please take me off the list as I was hoping for US versions.

If I may make a suggestion. Maybe tag everyone on that list to get their attention so that you’re not stuck with excess inventory.

 

[Time2Fly]

For those looking at these, I believe the service manual is for the V6, and the handbook for the UK version.

 

[Porter]

Guys, the service manual will be identical. I actually don't know if there is a "US specific" service manual. This covers both RHD and LHD.

 

[Martylemoo]

As said above, the service manual is for the V6. It’s not country specific.

The user manual is U.K. specific, but all controls are the same (minus the LHD/RHD)

 

[ADC]

U.S. gang can just read it in a mirror, right...?

 

[netsinah]

As said above, the service manual is for the V6. It’s not country specific.

The user manual is U.K. specific, but all controls are the same (minus the LHD/RHD)

Put me back on "the list" for the service manual (only). Send me a private message so I can pay in advance. Thanks Marty.

Here's wishing everyone a great/safe/family and friend intensive, Easter long w/e!

 

[blacklotus]

Put me back on "the list" for the service manual (only). Send me a private message so I can pay in advance. Thanks Marty.

Here's wishing everyone a great/safe/family and friend intensive, Easter long w/e!

Ill do the same. Keep the service manual but will drop the UK user manual. Also happy to pay in advance!

 

[benjh1028]

I’m looking forward to the UK version as it will teach me the proper pronunciation of words such as aluminum (aloo-mineum) and schedule (shed-jule) as they never taught us correctly in American schools (shools?).