Coolant additives to decrease engine temperatures

* * * * *
For your info..............
I own a 2021 new purchased Evora GT 410 Sport IPS (automatic)
I installed 3 temp. meters and found that these temperatures during moderate driving at 75 mph and 22 degr. C / 72 degr. F. outside temp. are:
1) Engine oil typically approx. 80 degr. C. / 176 degr. F.
2) IPS oil temp. typically approx. 60 degr. C. / 140 degr. F.
3) Compressor cooling water temp. typically approx. 30-35 degr. C. / 86-95 degr. F.

IMG20241004162010.webp
 
Will let my dealer check all this after my track day. You guys are so helpful! THANK YOU!!!
 
I put in a bottle of water wetter as soon as I got the car.
On "normal" days, it sits at 85 degrees. On super hot days, the highest I've seen it is 89 degrees.
I did in the engine coolant tank and noticed a difference in engine temps right away.

I also have v6 auto and concerned about cooling.

what are the part numbers for these or where can we buy these in USA

ok for the Thermostat (road/track) this should work correct?
and this is the race only version
 
Last edited:
you can get this at any autozone just make sure the car is cold and its not at the max line

1757243619184.webp



if you're doing a full flush then maybe use VP Racing fuels Stay-Frosty otherwise the VP Cool Down additive is likely better than water wetter with OEM coolant until you flush for VP Racing fuels Stay-Frosty
 
Last edited:

Create an account or login to comment

Join now to leave a comment enjoy browsing the site ad-free!

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top