I had it on my M2CS and it was great on the track, annoying on all other roads off track to the point that I switched to a DCT M2CS and like it much better.
-
📸 We've added a new feature to the site, the Showcase! You can check it out at this link: EmiraForum.com Showcase
🖼️ You can read a bit more at the announcement thread as well: Showcase -- an upgraded Journal
JUBU Group Buy 15% discount
- Thread starter hellasf1
- Start date
- Thread starter
- #202
Hope everyone has been doing well!
I recently have gone from the 440 to the 460 kit. Had it for 1 week and wanted to share my thoughts. Its only a 20 hp gain but I love the car even more now! Larger pully so my boost decreased. I can feel the gain everywhere but mainly mid and high but I can tell the speed moves faster and cover more ground! No added TQ on this set up until 500 or greater kit. I would have started with the 460 over the 440 if I did it again from the start.
I big part of why I love driving it more is the new headers and y-pipe, both were heat wrapped. The quality of these are amazing, even my shop was very impressed! I did choose to go with high flow cat as well, this is not heat shield wrapped. This replaced my Milltek 3rd cat delete. I still have the Milltek exhaust system with this new set up. This set up sounds absolutely amazing! True F1 exotic sound. Videos don't do it justice but I will post some. (Did anyone know that the stock headers only have 1 cat? My left header was fake had nothing in it and the right had the cat. Idk if that is everyones set up or just mine)
But this set up has made the normal cruising and idle quieter but soon as you go WOT it screams! I have Milltek controller and I run it open all the time, really no need to turn it to OEM or off worrying its too loud. It crazy how its a 2 sided set up now with no gas smell! I might decide to change the high flow cat to the Milltek 3rd cat delete if I want it loud all the time. I would gain 3-5 hp too but right now I am really liking this. But the WOT with or without high flow cat is identical, maybe a very very narrow difference. I also like this bc I still get to hear the intake noise down low!
I also did the cooling kit with this upgrade and I highly recommend! My engine temp started at 200 normal operation stock. After I went with the 440 kit which was just and ECU engine temp was at 185 max operating temp. This was just from the ECU. Then with the 460 kit I did the cooling and now my normal operating temperature 173. Note I only drive in track mode 99% of the time. But a 27 degree decrease in engine temperature is a testament of this ECU and cooling kit from JUBU!
JUBU isn't for everyone. I think if you are serious on your build its for you! I do plan on going to the 530 or 600 kit. Probably 530 so I can spread upgrades to other parts rather than all power! If anyone has anyone questions let me know!
I recently have gone from the 440 to the 460 kit. Had it for 1 week and wanted to share my thoughts. Its only a 20 hp gain but I love the car even more now! Larger pully so my boost decreased. I can feel the gain everywhere but mainly mid and high but I can tell the speed moves faster and cover more ground! No added TQ on this set up until 500 or greater kit. I would have started with the 460 over the 440 if I did it again from the start.
I big part of why I love driving it more is the new headers and y-pipe, both were heat wrapped. The quality of these are amazing, even my shop was very impressed! I did choose to go with high flow cat as well, this is not heat shield wrapped. This replaced my Milltek 3rd cat delete. I still have the Milltek exhaust system with this new set up. This set up sounds absolutely amazing! True F1 exotic sound. Videos don't do it justice but I will post some. (Did anyone know that the stock headers only have 1 cat? My left header was fake had nothing in it and the right had the cat. Idk if that is everyones set up or just mine)
But this set up has made the normal cruising and idle quieter but soon as you go WOT it screams! I have Milltek controller and I run it open all the time, really no need to turn it to OEM or off worrying its too loud. It crazy how its a 2 sided set up now with no gas smell! I might decide to change the high flow cat to the Milltek 3rd cat delete if I want it loud all the time. I would gain 3-5 hp too but right now I am really liking this. But the WOT with or without high flow cat is identical, maybe a very very narrow difference. I also like this bc I still get to hear the intake noise down low!
I also did the cooling kit with this upgrade and I highly recommend! My engine temp started at 200 normal operation stock. After I went with the 440 kit which was just and ECU engine temp was at 185 max operating temp. This was just from the ECU. Then with the 460 kit I did the cooling and now my normal operating temperature 173. Note I only drive in track mode 99% of the time. But a 27 degree decrease in engine temperature is a testament of this ECU and cooling kit from JUBU!
JUBU isn't for everyone. I think if you are serious on your build its for you! I do plan on going to the 530 or 600 kit. Probably 530 so I can spread upgrades to other parts rather than all power! If anyone has anyone questions let me know!
Car sounds great. Best I've heard yet! So did you choose the sports cat as the only cat, eliminating the one cat on the header?
- Thread starter
- #207
Yes correct!
Create an account or login to comment
Join now to leave a comment enjoy browsing the site ad-free!
Create account
Create an account on our community. It's easy!
Log in
Already have an account? Log in here.
Emira Forum Images
Emira Forum Images
