Search results

Yes, a 2" diameter would be nice with no set screw. The hole in the back bothers the heck out of me.

btw, I have EBC Red pads and 12mm spacers all around.

I never had noticed but went to check on mine and found that same edge scarring on my discs as well, but oddly it's on the front ones, not on the rear ones. There's a score on one section of the perimeter of the left and right disc. This make me suspect if they come from factory like this, but...

Did both side axles break or just one?

I ordered on that same day and we just missed the first batch, but Greg mentioned that depending on the amount to be received from Berger, we should be on this next one.

Can't blame you. As soon as I receive mine, it's going in, even if I have to stick it temporarily with chewing gum.

Admirable restraint power!

In Greg's response above, he meant to say that it's the first item displayed on the "Emira Performance Items" subsection.

Impressive. Seems like Mr. Shakespeare preferred the V6 over the i4.

Are you still on Map 91 octane or have you tried the 93?

Just for some clarification, the need for an OBDII constant connection to the JB4 module was addressed earlier in this thread by @mr.suntorytime whose Emira, I believe, was a test mule for the JB4. In his post of May 7th he said: "the cable that needs to go from cabin to the engine bay is the...

This last picture get's my vote for Emira of the Month.

And how are the brackets coming along?

Hmm, how about I a management buyout of the 3 perilous automakers to form McLotus Martin offering a full lineup of specialized ICE sports cars.

Can you provide a picture of the installed bracket/JB4 in the engine bay?

If, for instance, you had it set it to the 93 map and kept the OBDII plug disconnected, will it maintain the 93 map in memory or will it default to the lowest map?

Installed my Radium Catch Can today. Many thanks to @silent cilantro for his help in designing the adapter and guiding me through the process with all the parts needed. Based on the results of his last post, I decided to install a single Radium can which I connected to the rear PCV. This is...

Hi Blat, I'm not sure if you've already done this, but you need to. First, remove the 2 small side panels in the back shelf area where the subwoofer is on one side and the boot release cable is on the other (they are only secured by clips). Then, remove the large vertical carpeted panel which...

Hi Adam, When I removed the rear shelf trim piece for my soundproofing project, I also noticed that wide gap and loose fit in the window/trim area, particularly in the top corner section of the plastic trim piece. I ensured that all the trim pice clips had been properly aligned and locked...

Hi Greg, As mentioned in an earlier post here, presumably installation instructions will be provided along with the recommended mounting location for the tuner module in the engine bay. When surfing the net, I came across a couple of aftermarket mounts for the JB4 customized for the Supra and...

Hi Folks, I used the color codes mentioned above by @netsinah having researched how Lotus generally codes their speaker wiring. Particularly as it pertains to tweeter wiring, the polarity is not really that important, unless you reverse the polarity on one of the tweeters, but not the other...

If there's any chance of getting a compatible aftermarket kit for the Emira, it would likely have to be a UK-based provider/installer (or maybe a Lotus Dealer) that could get the CAN bus coding from the manufacturer.

These guys offer proximity keyless door lock kits ( https://vaistech.com/dealer-map/ ), but when I called them to inquire, they said that, because their installers don't have access to the CAN bus codes for the Emira (or any other Lotus model for that matter), they wouldn't be able to perform...

I didn't intend this thread to spark a debate of how secure or not a proximity keyless entry is. This inevitably becomes a risk/convenience tradeoff, not dissimilar to other everyday features like, for instance, garage door openers. Imo, there are two (or at least one) inherent theft...

Funny Joisy laws.

There are a few aftermarket Keyless Entry kits offered out there with proximity sensors to unlock doors. This continues to be a feature that I very much miss having on my Emira, and it's the only car in my household without it. Has anyone tried installing such a kit?

Ha ha, nearly?

Hi, I had originally connected mine with a dedicated connection through the firewall directly to the battery, but after @jp129 posted his picture revealing that additional (unused) power source under the fuse box, while I had the panels off for soundproofing, I decided to re-connect it to the...

Weird... I installed my GRP 3rd Cat delete pipe w/o the need of expanding anything, as It fit like a glove. I can't understand the inconsistency of pipe diameter sizes.

Sorry, my bad. Not screws, rather it's a plastic tab that you pull out as shown in the diagram.

Open the console arm rest and you will find a couple of additional screws at the front end. That should do the job.

Not sure chicks like the McLaren more, but I understand light poles actually do.

Being prepared for mod surgery.