Radar Detector hardwire?

[boostm3]

Maybe a bit premature, but has anybody hardwire installed a radar detector or have knowledge of such? Looking to see whether mirror taps, or fuse box taps have been successfully implemented and, if so, how.

 

[VL3X]

Maybe a bit premature, but has anybody hardwire installed a radar detector or have knowledge of such? Looking to see whether mirror taps, or fuse box taps have been successfully implemented and, if so, how.

Welcome to the forum @boostm3! Not sure if anyone has hardwired one yet, but there is a USB port up near the rearview mirror. We have a lengthy thread about dashcam wiring and mounting that might help. It's been years since I used a radar detector, so not sure if the modern ones can be powered by USB.

 

[Maurice R]

For Escort radar detector you can get a usb cable from them. Not sure about other brands.

 

[boostm3]

Welcome to the forum @boostm3! Not sure if anyone has hardwired one yet, but there is a USB port up near the rearview mirror. We have a lengthy thread about dashcam wiring and mounting that might help. It's been years since I used a radar detector, so not sure if the modern ones can be powered by USB.

Thanks so much for that.. I use a Uniden detector and there is, indeed, a usb cable that would work perfectly!

 

[KAR120C]

To use the USB for many radar detectors, the voltage needs to be increased from 5V to 12V. Amazon sells a ton 5V to 12V adapters, but here is one that is ready made for the RJ11 plug: https://www.stickerfab.com/collecti...ne-uniden-radar-detector-power-cord-universal

I plan to use it when the time finally comes.

 

[robrmon]

I agree with @karl120c that this is the cleanest install. Also highlighting for those who plan on using more advanced setups with jammers, there is a fuse box in the front the other side of the firewall.

 

[kitkat]

Thanks so much for that.. I use a Uniden detector and there is, indeed, a usb cable that would work perfectly!

The Uniden R series won't power on via 5V USB, that's only used for firmware etc. Like Karl mentioned you'll need USB 5V to RJ11 12V step up if you want to do that, or hardwire to ACC in the fusebox.

 

[boostm3]

Thanks all. WIth my M2 I had to tap into the wiring in the rear view mirror.. This USB port, located where it is, makes it a no brainer.. Thanks for all your posts. I got this!

 

[Subw00er]

I'm going to give this 5-12v one a try.. They have a 1.6ft version that looks tidy. Ordered.

Amazon productIts not letting me past the url, but its :

• ASIN ‏ : ‎ B0C9TKJ846

 

[kitkat]

I'm going to give this 5-12v one a try.. They have a 1.6ft version that looks tidy. Ordered.

Amazon productIts not letting me past the url, but its :

• ASIN ‏ : ‎ B0C9TKJ846

Others have reported it not working very well, good luck!

 

[Subw00er]

Others have reported it not working very well, good luck!

Ah, ok bummer. I'll follow up in a week.. maybe ill just make my own.

 

[MIGZ]

Credit another forum member this is the switch hot. I needed to run V1G2

 

[Subw00er]

Credit another forum member this is the switch hot. I needed to run V1G2
View attachment 38960

Cool, good to know!

 

[Subw00er]

Just received this.. It didnt work for me either untill I plugged it into a higher amperage usb port (computer). I guess we’ll see if the Emira has a decent output up there.

 

[Lsp408]

Tried the same thing. The 5V to 12V did not work for me (Escort Maxcam360c)

Going with the wiretap method