Search results

I also had the OBDLink CX that I used to code an M2 Competition in the past. I have used it and the OBDLink App to read the Emira, but it could not find the SRS fault. It could find the drivetrain systems. Recently I needed to try to reset the airbag SRS light and was looking for an App that may...

I would call this place. I've purchased from them several times in the past. These help. Thye don't list Lotus colors, but they should be able to make a special color. https://bumperplugs.com/index.php?route=common/home

I think you need two new bolts for the rear of the new tray that were not needed for the smaller tray that is replaced.

Someday hopefully we can figure out how to access the software coding and make some good changes. I believe this light is always illuminated because the DRL's in the U.S. are coded to be "always on".

I installed quite a bit of sound deadener and insulation. The difference particularly in the mid bass and bass is night/day. The bass is very consistent now and strong. I have the mid and bass dialed up now to 2 or 3. I am able to listen at a volume level much higher than before, mid to two...

The two metal u clips clamp the diffuser to the fender liner behind the rear wheel low on the car. There is also a small plastic piece that is epoxied in at that location that has popped out if the clips were not removed first. It's something that you want to make sure is reinstalled to make a...

I inquired with the developer of the App about the Emira. I asked if they would be willing to offer some coding for it. If they know or can determine which underly Geely based software system is being used for the various software modules, they should be able to port some of these over in their...

Recently, I had my airbag covered with Alcantara. While the airbag was out, I received the airbag error and related malfunction codes in the gauge cluster as I needed to start and use the car. I was looking for a way to reset the airbag code using an OBD2 Bluetooth plugin reader once it was...

It was a major PITA unlike others that I removed in the past. I used a number of solvents, ended up with denatured alcohol. I'm not sure just how much that helped but it may have softened it a bit. Basically, I scratched at it with my fingernails and also a small plastic bondo applicator and it...

For those with interiors with contrast stitching, those sun visors would look great with that option.

This is the issue. It's hard to reseat those clips in that area. Instead of wood, maybe try a small block of hard foam type material. Let us know what worked for you.

He could do it!

He offered to have contrasting stitching, but I opted for black as all the other Alcantara was black stitched. This is not on the website, you would have to ask Greg directly. I did ask him about making this post and he was fine with it so I beleive he would be open to helping others. I think...

I prefer this over Carbon Fiber also. I am not local to GRP, live in the MIdwest. I contacted Greg earlier in the year to see if he could help with the custom work. As most know about Greg, he was happy to offer assistance and have his upholsterer take a shot at wrapping the parts. I shipped...

I upgraded the airbag and gauge surround to Alcantara thanks to @GRP. I really like the way it turned out. Looks much more cohesive to me now and feels much better. Those two pieces were about the only items that you see in the interior that were not wrapped in leather or Alcantara. Gerg's...

I upgraded the airbag and gauge surround to Alcantara thanks to @GRP. I really like the way it turned out. Looks much more cohesive to me now and feels much better. Those two pieces were about the only items that you see in the interior that were not wrapped in leather or Alcantara. Gerg's...

I'm interested in the Lotus wooden shift knob also. I've been trying to obtain the one form the special edition Evora with no luck yet. This one though looks like a matte finish versus the gloss on the Evora model. I think based on these photos I like the Evora color and finish more.

I've been hoping they add this to an updated version on the Emira. I have to think the capability exists in the Emira's software. I miss this also. Maybe it then could be retrofitted easily (or not). It does explain why there is that rear hatch opening button front and (left) center on the dash.

I hope you figure this out and determine how to make some software changes for the Emira, ALA Bimmercode and then sell them to the community. Sure seems that you have the knowledge.

Ryan, what all can you read/clear with that scanner. Do you know if it can read/clear an airbag fault? Or read/clear the SRS fault after the battery drains for that system? seeing as these cars employ systems from multiple brands it would be nice to confirm a scanner that can access multiple of...

How difficult was the removal, and did it appear to be easy to make any adjustments to the fitment of the panel when reinstalling it? One of my taillight gaskets is hanging out a bit but I'm not sure I want the dealer to mess with it.

Thanks so much. I've been hoping someone would do this also. What did you use to make that dipstick?

I'm wondering if there is a way to adjust the Fore/Aft shifter "play". I have done the mod to remove the cage around the shifter and currently have things apart as I install the automatic version of the lower tray in the console. my shifter has about a half inch or so of fore/aft play. Maybe...

I'm wondering if there is an adjustment possible in step 24 of the attachment. It also may be step 26 however I am not removing the seats for this. :)

I saw those and tried to lock it in there but mine is so misaligned that it broke off the plastic on the new tray. I'm going to try to see if there is some adjustment that can be made on the console panel and if not just bolt it in place. Chirowolf is correct in that I will probably be the only...

So, I began the automatic tray install today. I've noticed after I cut the hole in the tray and placed it in position that my console trim that it is supposed to line up with it is skewed towards the driver's side. by this I mean there is a gap along the left side as it meets the carpeted trim...

You should be able to just pop off the trim piece in the lower section of that rear quarter trim panel to access the amp wiring. I don't have a picture of how it attaches but it has 2 push in connectors toward the seat area and then pulls out forward once you pop out the front section. That is...

It's a pain, but on the iPhone you can disconnect them reconnect CarPlay while the car is running and that should reset this.

Did you use a Dremel to make the cuts in the tray?

I have noticed something like this in the past. I will be using Spotify, but the dashboard function does not show it is in Spotify and therefore you can't use the steering wheel controls to forward a Spotify song, but the center screen does work. This has not happened for a long time. It used to...

I do not have that gap. I did notice though that it is difficult to get the clips that attach the trim piece around the (high up near the corners where it meets the headliner) glass to seat properly with the trim piece for the rear side panels. If those clips do not seat properly, it could allow...

I found a loose screw around the rear window when I had my interior apart to install soundproofing. The screw had a washer on it and I'm sure it must have been making noise however it was on the passenger side, and I did not hear it.

It's much easier to use the voice function if you change to the non-haptic steering wheel buttons. I would not use it at all before making the change. I used it to turn on the heated seats. Easier than finding it in the center display. I'll use it for more things going forward now that its...

We need someone to develop a "Bimmercode" light for the Emira. There are a number of coding changes that would be nice to make. Several people have reached out to multiple vendors that provide coding services but none of them have shown interest. I'm sure the Lotus service software could turn...