Search results

I'm fine without extra grills, after almost a year of ownership my filter wasn't that bad, certainly no large bug pieces or even any leaves. Not sure if this grill thing is really that necessary.

Once an oil change, kinda depends on how you drive, more often if you're in the camp that changes oil once every 10,000 mi. If you don't empty it, it will act as a straight passthrough from the PCV like your car behaves now.

Almost all of the locations with 100 I have seen here and at the track are all unleaded.

Yes there’s definitely more sound now, not sure how to describe that.

Yup

This is the Aenemos front splitter right? I didn’t know it was so strong!

I’ve been on the 93 map with a mix of ACN 91 and 5 gal of 100 octane all weekend. It pulls hard mid and top end for sure! I honestly need to put more aggressive brake pads back in because the speed builds up very quickly now. Drivability is completely untouched, it’s the same car with just a lot...

Do it now, and you’ll probably want to run the 93 map if you can. I put 5 gals of 100 in to try it out and my god it has legs now, feels faster than my old f82.

Pretty sure the car’s calculations were confused before JB4 too lol!

I’m not sure how you’re interpreting this — but even at 2,500 rpm there’s a 25 ft lbs difference in torque.

Follow these steps, do it on both sides not just one. This should reveal it all I think. I believe there are two grommets, one for an existing harness and a blank one. I’m still working on a tutorial for that but trying to not touch cars for the weekend haha 🤣

A few people have sent in their logs already and Burger just okays them to say nothing needs to be changed. I think they’re just checking for safety. As for OBD2, not even Burger is guaranteeing the OBD2 for sure will improve anything I think that’s just their standard language.

I have not ever heard anything like that from my clutch that’s for sure.

Correct!

Weight weenies unite!

Good luck! 🫡

Correct, the JB4 unit needs access to CAN which it does not do with those two connectors to the map and tmap sensors.

You don’t have to install the OBD2 cable at all if you don’t want to but you need it if you plan on sending logs back to Burger to fine tune things or check your fueling quality. Reading OBD over BT ELM would be nice but I think they’d need a new board for this and probably move over to...

Completely fine too, use the same kind of shape cuts. I’m just trying to find excuses to use my 3d printer and 2 kg of TPU :ROFLMAO:

Let's just say if you drop a screw or a tool, your installation time goes up by the amount of time it takes you to jack the car up and remove all the underpanels and put them back on. That's _if_ you find them at all.

I have to figure out the OBD2 cable, I'll be removing the rubber blank plug on the firewall and printing out a new one out of TPU. I have an idea of what it will look like but I still have to pull it out and take measurements. It's a problem because I think my carbon buckets might have to be...

V6 install video up at https://www.emiraforum.com/threads/diy-v6-burger-motorsports-jb4-installation.6361/ If you want an I4 install video feel free to buy me an I4 first. :ROFLMAO:

Time for another Emira V6 DIY, this time it's for the Burger Motorsports JB4! Installation Overview Instructions This installation assumes you are using a Darkworks Design JB4 Stealth Bracket. If you aren't, please skip steps 3-7 and figure out a way to zip tie your JB4. 1. Optional: Install...

Yes!

Figuring out why they only have 18 minutes to install a whole ass dash and a shifter or something lol.

Oof! It doesn’t bring sound into the cabin?

Did you put a hole in this grommet and feed it through or just leave it out? And where does this exit?

Multiple people have sheered an axle doing launches on the Emira on stock power and torque including a professional car review channel.

Alright so I’ve test fit the installation and figuring out wiring routing, bracket mounting etc. I’ll have an installation tutorial up in the next two days because now I need to dismount everything to take video/photos etc. As for the drive, well I’ve only driven in Map 1 for 91 Octane for 25...

Greg got the first like 20 or so V6 from Burger I think?

🫣

Never thought about white interior with this, it looks incredible.

Nope, I will likely put them on next week to take some photos and then put them for sale after that.

The offset was fine, I just thought the concavity of the wheel design was lacking and in my mind the diamond cut face would be cool but it ended up being too flashy for me. I'll probably get something else made and sell these.

Nice 7200rpm they got there 😭

I didn't sorry, I just based my understand on prior reporting of the battery weight. I also already gave away the stock 12V.

I've also installed an Antigravity battery. Interesting piece of info, the OEM battery bracket on many cars does not include a battery keeping M5 screw/nut. This prevents the battery from sliding left and right, mine never came with one and the antigravity battery couldn't be held down well...