USA i4 Emira P2541 - Low Pressure Fuel System Sensor Circuit Low

gcmak

Emira Fan
Joined
Mar 23, 2024
Messages
133
Media
66
Reaction score
124
Status:
Emira Owner
Hi all! 2,000 miles in and I think the car is finally broken in with it's first CEL! (long post but I figure some details might matter)
I picked up my car in February 2025 and it's had a few known issues: intermittent turn signal hyper flash, e-brake no longer automatically releasing, telematics errors etc. All things I personally I have overlooked/ignored.

Yesterday before a motorsport event, I opened the car door and as the dash booted up the CEL was displaying. I knew something was up. Started the car and sure enough the CEL stayed on. P2541.
IMG_0819.webp


Drove to breakfast, thinking a drive and power cycle would clear it but no. I decided to clear the code and drive to the track. CEL cleared but there's still a permanent code but also a pending code. When it was time for me to go up to grid, the CEL re-appared upon opening the door and stayed lit starting the car. I cleared it again. The car never sounded or ran strangely in any way.
IMG_0821.webp

IMG_0825.webp

IMG_0826.webp

The only thing that stood out to me in the freeze Frame data is the vehicle speed at 158.45 mph - I wish? but also not possible.

I noticed on FB someone posted at 2,000 miles their car popped up a message for Engine System Service urgent...sure enough that came up for me as well during the day and went away with a restart.
IMG_0861.webp

You'll note no CEL and the CEL hasn't come back on since the second clearing.
Once I got home from the day I checked again and the permanent code is still there. I pulled the battery for an hour and it's still there (no CEL).
IMG_0877.webp

So I think I'll just drive the car and see if the CEL comes back again.
Anyone else see this on their car?
 
What obd2 scanner are you using? Looks like it gives is useful data as to parameters when CEL was triggered. Thanks in advance.
 
What obd2 scanner are you using? Looks like it gives is useful data as to parameters when CEL was triggered. Thanks in advance.
Both my OBDii readers work with the Emira. Veepeak and OBDLink MX+. OBD Fusion and OBDLink apps respectively. Not all apps work with each scanner due to different protocols.

They'll also link out to some potentially helpful information:
IMG_0829.webp
 

Create an account or login to comment

Join now to leave a comment enjoy browsing the site ad-free!

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top