Search results

Hello guys.. I just took my car for a 5 min ride and suddenly red warning light popped up with limited rpm. I stopped for a second to check but light was gone after restarting the car but it feels light it has lost some power. I have value controller/3rd cat delet/ and evanturi intake installed...

i have the same issue with my car. Code P0415 evap sensor CEL . I have installed eventuri Intake and 3rd cat delete with miltek sensor. If I have to take it to the dealer, should I put it back to stock before I put in for service? I'm just worried that after market parts would void any warranty.

@Time2Fly i just got obdii scanner from Amazon and scanned for code. It's evap pressure sensor ? Code which I don't know what this is but would eventuri Intake might have caused it? I accidently delete the CEL but would this something that I have to take it to the dealer and repair? Please 🙏...

thanks, just ordered one from Amazon and will try it asap.

I was planning on taking my Emira to my weekly soccer game but check engine light is on.. it was fine for about a 3 weeks now after eventuri Intake and 3rd cat delete. Does anyone know what could be the cause? Should I put it back to stock before I call the dealer?? Thanks in advance.

Thanks for your reply. I had no issue going over 100mph before.. but now, I feel vibration at 75mph and above... when I searched online, it seems like I need tire balancing but given this car is new... my tire shop said I don't need one...

Hello everyone, I'm experiencing some vibration in my Emira at high speeds. I can manage it by gripping the steering wheel tightly, but I wanted to reach out for advice. Recently, I've installed the following: Lowering sleeves 12mm GRP hub-centric spacers CT carbon kit Eventuri intake Miltek...

I have same issue and took it to the dealer couple of weeks ago and they couldnt find anything wrong.. but it clearly vibrate when the A/C is on at idle.. will changing the compressor fix the issue??

I just finished installing bunch of stuff I ordered from Greg. 1. Eventuri Intake 2. Miltek valve controller 3. 3rd cat delete 4. CT Carbon full kit 5. Lowering sleeves 6. 12mm hub centric wheel spacers I'm so happy with the result and just researching on what to do next. Any...

I just installed 12mm hub centric spacers from GRP and lowering sleeves. Also did CT carbon full kit and it looks awsome. Prior to this installation, I also did 3 rd cat delete with miltek valve control and eventuri Intake. So far no issue whatsoever just happy with the result.

Thanks to everyone for inputting suggestions.. @crashprash does sound change after y pipe? Any power gain?? I currently have 3rd cat delete but adding y pipe would change sound and power??

After reading through members comments on headers, it got me worried about installing headers and y pipe. Does anyone have recommendations on how to avoid check engine light with headers and y pipe ?? My car is currently equipped with 1. Eventuri Intake 2. Miltek valve control 3. 3rd cat...

Many members are surprisingly having issues with their air conditioning. Reading through their experiences makes me feel fortunate that my car's problem seems minor in comparison. My A/C started vibrating when it's on at complete stop, regardless of the A/C speed. Initially, the whole car...

Your car looks awesome 👌 how much did you end up lowering?? I'm still waiting on CT Carbon kits so I'll be installing mine when it arrives. I'm still holding on to the GRP kit yet until I see how low I can go without scraping every bumps.. and did you install the spacers also ??

Hi, thanks for the link. I was about to install GRPs spacer but reading many members complaints got me to think again. Since you've installed 12mm spacer, what size bolt did you buy??

No.. I didn't wrap it... it's mist white.

I purchased the lowering kit from GRP and also CT Carbon kit from them but considering a road condition in Los Angeles, I'm still don't know how much to lower my emira. I do not want to scrape every bumps but still want that sharp look when you lower it. Has anyone lowered Emira using GRP...

A1 automotive looks to be a great shop with lots of lotus experience but price was bit high. Oil change was $240 when I got mine done and when i asked for other installation quote, price was ridiculous high. Except for the oil change, I got mine done at technic automotive where I got my PPF...

Just installed 3rd cat delete w/ miltek valve control and Eventuri Intake. Car sounds awesome and felt lot of torque added on higher rpm. Is it intake? Or 3rd cat delete? Next is lowering kit w/ 10mm spacers and CT body kit. I'll post more photos when I get it done hopefully next week.

Just curious how everyone is driving Emira on standard or track mode. After 1000mile mark with oil change, I mostly drive it on Track mode, but just curious It will be bad for the car in a long run. 😅 I only drive 20-50 miles per drive every other weekend.

Did 1000miles break in oil change at A1 auto in San Gabriel couple of days ago so I took it to my usual weekend golf trip today. As expected, Golf bag fits perfectly 👌 you just need to take driver and 3 wood out and put it back of your seat. Everything was perfect except my friends booked a tee...

Purchased!! Best $24 spent for Emira.

Congrats!!! That's way too much for simple install I think.. I haven't talk to guy named Harry from A1 automotive in San Gabriel Valley yet but I'm going to call them tomorrow and set up appointment for break-in Oil change/intake/3rd cat delet/valve controller/lowering kit. If you look them up...

Can anyone here help me figure out how much to lower my emira? My order is on its way from GRP 1. GRP lowering kit 2. GRP spacers w/lug nut? 3. CT Carbon complete kit 4. GRP 3rd cat delete w/ valve control 5. Eventuri Intake I live in Socal so road condition is horrible but I only planning on...

Looks very nice,, I'm waiting for GRP to ship my lowering kit. How much did you lowered your car? And how's the ride quality? Thanks

Hi, did dealer repair your seats? Or do you have to do it yourself?? I think my driver side seats are pretty much similar.

Thanks, I bought my car from there. I just don't want to give anymore ridiculous profit margin to a dealer.

I'm down to drive to OC if I have to. Can you recommend some shops for me?

I wish I can enjoy more time with my car but I dont do well with tools so i think its best to trust specialist to do it. ^^

Now that my Emira is at around 400 miles, im preparing to do oil change but I dont trust myself with this car so DIY is out of the option. Planning on taking my car to a shop, I know dealer charges a lot, so do you recommend taking it to Jiffy Lube or any oil change shop ? can anyone help me...