Search results

Wheel Specs: Fully forged 6061-T6 Aluminum - Styled after the Volk CE28N Fronts: 20x8.5 +47 offset; weighs 23 lbs on my corner balance scale (OEM Diamond cut forged front wheels came in at 26lbs) Rears: 20x10.5 +42 offset; weighs 24 lbs on my corner balance scale (OEM Diamond cut forged rear...

I reached out to Maxton Design UK asking if they have anything in development for the Emira and they said not at the moment. However, if Emira owners showed enough interest, they would be willing to consider developing aero pieces for the car. I've had "Street" Maxton lips and side skirts on...

This information is purely my experience and serves only for your entertainment. I will not be liable or held responsible in what you do with this information. Please proceed at your own risk. Tools needed: 4mm HEX/allen socket 7mm socket 9mm socket 10mm socket Long socket extention for the 9mm...

Checking with the hive if anyone here has/is using multiple sets of wheels (Street/Track or Winter/Summer) on their Emira? I am inquiring if the TPMS sensors are hardcoded to the car and only 1 set can be programmed? Or it's not hardcoded and as long as you use the correct Lotus TPMS sensors...

Darkworks Design shifter boot delete trim arrived today and was a breeze to install. Just need a T-10 torx to undo the 4 bolts holding the OEM boot trim to the center console and snips to cut the zip tie from the reverse collar. Took about 10 mins. Most of that was trying to pry the center...

Has anyone on here utilized the Emira DS diag/prog interface from Lotus Aftersales? Reading through the Diagnostic README document, I think the Mongoose J2534 "Toyota3" is the appropriate adapter, but curious if anyone on the forums has actually utilized EmiraDS...

I didn't see a guide on replacing/bleeding the Brake/clutch fluid so, I've put one together. This information is purely my experience and serves only for your entertainment. I will not be liable or held responsible in what you do with this information. Please proceed at your own risk. Tools...

Does anyone have an aggregated list of all the TSBs out for our cars, whether V6 or I4? Aside from the HVAC Resistor, I just read a thread about rubber cups for the front suspension for front end creaks. Just curious if there's an ongoing list of TSBs available.

Any Houston based owners in here?

I've searched the forums but haven't really found anything solid on where the drain and fill holes are on the manual trans. Has anyone done a trans fluid change themselves?