Search results

Is that my company or did you buy them from elsewhere? I will look into that for you if they were bought directly from us.

I don't think it happens at all unless the car is parked nose uphill when it rains or is washed. At least that was when my car was affected.

I have fitted the GRP resistor plugs. https://www.gregsraceparts.com/collections/latest-products/products/grp-emira-seat-bypass-kits?variant=47395548528873 The car is currently in Bell & Covill having some other work done and I have asked them to clear the air bag fault light down, then we...

You set them the height you want. They can sit low but the brackets allow adjustment in height. Also seats like the B5, B8 and B9 have straight backs so this raises the head more than a B10, B6 or B7.

Ahh! but you haven't tried mine yet. Don't judge a seat by it's cover. :)

This was mine. https://www.dropbox.com/s/reknzo9ske74wtk/2023-03-14%2014.05.53.mov?dl=0 And I did get the blistering about a year later. But I cannot see how the water got through the laminate. Boats sit in water for years before the surface resin breaks down and the water travels up the...

My original doors did that. I always parked uphill on a slope and they would fill up until opened them. I used to park it facing downhill after. Another problem caused by developing a car in Norfolk where it's flat. Like the one where the seat belts would not come out on a downhill slope. I...

Nice seats in there. :) Anyone who thinks they won't fit an XL should look at the chap in this video.

I have got an Elise as my other car. I don't use it often but even without the ultimate power of other cars there are few cars like it for making you laugh out loud. It's such great fun. If you drive a car because you want to impress others buy a Porsche, If you want a car to impress yourself...

Seats!

I was only joking, I have got panels already so customer orders must come first.

Great to read your well written information Alan. It's great to see the feedback. We recently started shipping the seats with a new longer 35mm 14.9 high strength M8 bolt, which should be long enough for the spacers required on a standard B10, but you have got me worried now. I will check...

Opps! I got the date wrong. I nearly turned up a month early to get the car fixed.

The car goes in tomorrow so the reset will show if Greg’s resistor plugs clear the codes in the UK spec vehicles.

No sorry, not at the moment. I would suspect most will keep them just in case the next owner is four foot tall.

The factory is open Monday to Friday but If you are ever in Kent I will always be happy to meet you and let you sit in my car.

I can't help with the OEM seats. To me they are wrong and short of a huge amount of surgery, nothing is going to work. The lower back is wallowing in a load of soft foam and it's allowing the vertebrae to move independently. I can help if you would consider using our seats. Some people look at...

One thing to consider is that a hex bolt still comes off easily when it gets worn down. So if you do a Dukes of Hazard over a speed bump, you'll have problems getting button heads off.

I am nearly always around, so when convenient contact me and I am more than happy to arrange for you to come and sit in my car. I live at the point where the M20 and M26 meet. stevetillett@tillett.co.uk

How far away from Kent are you? You are welcome to come and test my seats.

It should be easy to do. We stick the logos to the seats all the time.

I was told that it’s come into stock. I know samples were sent to customers of a red that was close. I will find out what the score is tomorrow.

Photo by George Williams.

I left it on the seat. I just unplugged these two plugs and the small seat belt receptor connector under the side of the cushion cover.

If you are near the middle of Kent anytime in the near future you are welcome to come and try the B10 seats in my Emira.

With the warning lights I have some plugs from Gregs Race Parts. I need to get to the dealer and have the car reset but hopefully they will work. That being said I've been driving around for a year with them on. They are not that intrusive and I don't see them anymore but it would be nice if...

We have made them for our seats. I would think it would be easy enough with the Emira seat as the runners are flat based. Hole centres 420mm by 405 mm wide. I just wrapped mine up and stored them on a shelf, should the car ever be sold to a twenty stone man, or a four foot tall lady.

That was Gregory Clarks design for how he wanted his seats. I think I put him off when I said we couldn't sell a seat with just Lotus on it and he was adamant that he wanted only the Lotus logo. We have to be wary of branding products as if they are original equipment. I don't want to upset any...

The OEM seats gave me a bad lower back on the first journey back from Lotus. Since putting the B10XL's in I've driven six hours and never had the slightest problem. If the individual vertebrae do not move independently and don't have pressure points, they don't hurt.

I fully understand Lotus's desire to minimise their stock levels re number of parts, so only legislation where customers have the right to the spare would save the waste. Things like this mirror situation make the governments push to "go green" seem more ridiculous by the minute. So much more...

Understandable, Our greatest challenge often feels like finding ways of giving the people the opportunity to sit in them. We do the PRi show every year and display the seats there. Titan sell our seats in Florida but tend to specialise in the B1/B8/B9 shape which has a straighter back for cars...

I'm sure they would but it's really not that hard to do yourself. Probably the hardest part is unclipping the seat plugs by pushing in a little screwdriver and not doing your back in lifting out the OEM seats. The resistor plugs can be bought from GRP...

There does not seem to be a warranty issue when you take the seats out. I’ve had plenty of warranty work since fitting them and the only comment from Bell and Covill is that they wanted to stock them. I’m 100% certain that if you were to sit in the car with the B10XL’s in, you would never want...

Yes blank is fine. We are doing two red sets at the moment. So we are sending out leather samples to make sure they are a suitable match. Although we had permission to buy the leather, when we asked all they had in stock was the tan. Lotus are not ordering it at the moment.

We always must have Tillett on them otherwise Lotus could take a dim view of us using their Logo on our product. it cannot look like a Lotus product. se

Dreams can come true. :)

I didn't know but the factory had already done a tan set.

The resistors I was advised to use didn't work but I have since received some plugs from Greg's Race Parts. I have fitted them so when my car goes into the dealer, I will get them to reset things and see if it's gone. Given the choice of a notification on the dash and putting those spongy...

Patience is just one of many attributes required by the genuine Lotus enthusiast.