Search results

There were already about 20 Lotus there when I got there at 9:30AM and the number grew to like 30 when I left an hour later, Heard that the total reached about 50 when the event ended at 12:00PM.. Here's a short Video

Thanks, So you basically brought the driver side light level with the passenger side? That should be fine and would not affect oncoming traffic.

Can you take some pictures of what you light pattern looks like after the adjustments. Thanks.

how far was the light from the wall? 3/4" sound like a lot..

You have to hardwire to the fusebox in the footwell to get any kind of parking recording as the USB port in the mirror housing shuts off along with the car.

I actually like how mine turns out as I can see the status light since I had the notification volume down low.

It a Viofo A139 Pro. I didn't bother with the rear camera option as the view is so restrictive.

I finally got around to mounting the dashcam yesterday. I first tried mounting it directly under the mirror mount. Although it's totally hidden from my view by the mirror, it is quite noticeable from the outside. So I removed it and started over as they do give you extra adhesive pads. In the...

UPDATE: Just found out that the Black, White and one of the Seneca was sold yesterday. So 4 left.

There ae no auto in the US except for a few press cars.

what's the noticeable difference?

I've said it before and I'll say it again. There will be a lot of orphaned Emira available. Just have patience and make contact with dealers in your region. Boardwalk Lotus in Redwood City CA just sent this out. If you see one you like, make contact. I'm sure the same thing is happening at all...

Maybe that why the pricing is different than the default Lotus one but still more expensive than an independent shop as I also got full paint correction plus one layer of ceramic for less.

the film goes all the way to the panel edge and roll over a bit to the other side. The Lotus Dealer one is a pre-cut templates that does not go over the edge. in most places, it does not reach the edge and leaves like a 1-2mm space

Beware that it's not a roll over wrap.

LOL, same here, If my last 2 cars have not been blue, I would have looked for one of the Blue, probably not Seneca as too many of them running around but Meridian and Atlantis both look quite stunning.

I know that my Emira will be the shop's first so I wasn't surprised by (or was actually expecting) some problems, but I'm not going to put serious miles on it till it got a wrap.

some of the rolled over edges was peeling back after sitting in the sun . heard it's not uncommon since car is done indooe at lower temp and with all the curves, the film are stretched in some area. I went back the next day after letting the car sit under the sun for about 4 hours and they clean...

CC on all the black parts.

They went around the hood emblem and the 1st edition badge but lifted the letters then re-applied. seams are there in front of the air intake on the rear quarter panel but not noticeable at 3 feet.

Where are you, that's higher than Silicon Valley pricing 😜 Magma but Magma changes under the sun depending on angle. Had the car for a total of 4 days and 160 miles before handing it to the shop. Only because I didn't want it to sit at the shop over the weekend. Otherwise would have gone direct...

Finally got my car back after a week at the PPF shop, have minor issues that they'll fix when I go back for the 2 weeks check up but I kinda expected it as it's the first Emira at the shop.

R and S is just a Base with some options pre-packaged in. There will not be an up-engined V6. The reason they have to drop the Emira to 400bhp is Smog requirement have gotten tighter since the Evora.

There will not be any volume V6 run after FE 2.5 (the additional 2.0 allocation after the V6 auto and I4 delay announced in Dec). V6 production will end well before 2028 according to my dealer with Toyota shutting down the V6 production line.

Someone was waiting at my PPF shop for mine to get done so they can fit him in.

None and that part was never in the UK manual. My dealer basically told me to ignore.

Good luck and have fun!