Search results

I did the sound deadener/insulation in the doors. I applied Second Skin Damplifier to the inner section of the exterior of the door and to the exterior of the plastic door panel. The door panel job was tedious. I followed the instructions provided on the Tweeter Upgrade thread. I’d like to thank...

I would really like an option where we can upgrade the sub in the factory location. Perhaps find a better 6X9 inch sub or retrofit an 8-inch round model. I'd really rather not install a sub box on the rear shelf. I've looked up 6X9 inch subs and there appear to be 5 or 6 that may be a better...

If you determine the quantity and type needed, please share.

Smells like Bondo curing to me. I always notice it when I open the trunk.

If you decide to get the wireless charger kit in the link below it also comes with an ignition switched power supply. It's a great product. https://www.emiraforum.com/threads/custom-magsafe-wireless-charger.4353/

I began the project to install insulation in the doors. I took the door panel and inner door panel off and found this inspection sticker inside. It wasn't not attached very well so I'm happy I got it out.

Thanks, Crestima, and @KJWEmira I am getting ready to begin the insulation of the door project. I've ordered the Second Skin that you used. I have the instructions for the door panel removal, but I'm just wondering if it is pretty easy to do. Any issues with breaking the clips that hold the...

@crestima, Thanks for all of your informtion. I'm curious how much of the Second Skin was required to complete the doors? And did you also install some behind the seat area? Thanks,

Thanks for providing the info on what you did here. It sounds (pun intended) like this could be an interesting and inexpensive enhancement. I have a few questions. Could the sound deadening material have added to the improved sound quality? Do you think the sound deadening helped overall to...

I did the same thing with the 8-inch version of these. They worked well also.

A quality company will cover the expense. I'd really like to upgrade to that battery so it would be good to know they covered it. Thanks,

Are they going to credit you back the shipping expense for returning the battery?

I also wanted to install the CTEK Comfort Indicator Panel for a nice flush look with some added functionality, but I currently use an Optimum battery charger which has the same SAE connections as the Lotus supplied Battery Tender. I decided to use my rusty soldering skills to Frankenstein an...

I'm also having a difficult time determining what would be a great color for an aftermarket wheel with Nimbus.

I installed the new buttons today. They really are much better. I'm actually going to start to use the voice control now that I can successfully access it. Much easier to turn the heated seats off/on with that.

I just did this also. I flipped the bladder closest to the front of the seat up. Interestingly (or not) the button that should control the lower bladder controls the upper and vice versa. That bladder was in the uppermost position prior while they were folded together so it has always been...

So, I took this apart today to take a look and see if it looks like it is installed incorrectly. While the two bladders are installed unusually close to each other it does appear to be designed to be installed where they are. The white assembly the bladders are attached to have provisions for...

So, does all of this mean that in some seats the lumbar bladders are in the correct (or different spots) than others? I know I shouldn't be surprised but I would think that these bladders would not be designed to be repositioned as easily as it sounds, they are.

You can program the Open/Close features to your HomeLink if you have that option and have 2 available buttons to use.

How much difference did this make in the sound heard inside while driving?

I fiddled with the adjuster that is in the center of the vent, and it feels like whatever I did reduced the output in the center vents and increased them in the side vents. I know my right hand no longer freezes. They may close when pushed either to the right or left fully.

Check how your vents are adjusted. The center two on mine were full open and freezing my hands. The outer two were mostly closed. When I adjusted them, it was much better. You can also change the fan settings from high to low somewhere in the settings menu.

Hi, This looks very nice. Can you post a link to what you purchased again. The original one is not working. Thanks,

I like the design of the wheel, but much prefer the profile along the outside edge of this wheel. It's much smoother looking and modern looking.

Where did you get the shift knob? That looks very nice.

The paint comes off pretty easily with a bit of paint thinner. It's a very cool mod.

Maybe in the UK the stickers are attached in a different manner. U.S. stickers do not come off when they are soaked in alcohol, or other solvents. We used to be able to get these off, but I'm sure our government enacted some program to ensure they are extremely difficult to remove.

I'm almost done with the complete install now, just have to reinstall the lower kick panel. The instructions were really great. The only thing different for me is that I could find no screws that attached the console to the dash area as in section 3, step 7 of the instructions. They just don't...

This is really a cool mod, thanks again KitKat! I am partially through the installation; I have pried out center console panel. This may be obvious, but you could just install the shift boot delete at this point and not remove the mesh cages if you wanted. I'm going to do the complete install...

Thanks very much for inquiring with them. Off the top of my head here are a few items I would like to be able to change, I'm sure I could think of more. * Enable opening/closing the windows with the key FOB. This is turned off for the U.S. (and maybe other) markets. * Turn off the seat belt...

There is no 4K rev limit during the break in period. You are just not supposed to have sustained higher revs. It's good for an engine to have variable revs during the break in period including some higher rpms.

That would be awesome. Thanks!

This is off topic, and I am interested in this upgrade in the future. My question is, would this company be interested in developing a way to update the other software functions of the Emira, similar to what Bimmercode offers for BMW models? They appear to have the coding ability.

My CarPlay is pretty reliable now. It was a bit flaky when I first got the car and deleted everything in the car and everything on the phone and reconnected it and it's been much better now over time. It connects 99% of the time at start up, maybe 100%. It does disconnect all of the time when I...