Search results

You need to remove the small inner piece first, this has tabs down the side and then two at the bottom, so it kind of levers at the bottom (I've pull from the top). Then there's a clip on each of the four corners of the rest of the shroud, mine came off fairly easily if memory serves, can't...

I thought it was concluded that the twisted seatbelts are the correct orientation according to HQ?

Well if they want to offer a referral fee 😉

Not sure what lotus are thinking here but I just got the email through offering me the orphaned Emiras, perhaps they forgot I picked mine up 6 weeks ago 🤣

Yeah I chuckled at the "non" safety note, I've had experience of it, driving in pretty damn bad rain, had to slow to down to be able to be confident in driving the car since my view out was pretty obscured by the rain in-between the slow wipes, it wasn't very pleasant

Have had a recall letter through this morning for the wiper motors. Booked in to get fixed on the 14th, fingers crossed for no rain between now and then 😜 The letter says it's cars built up to 21/3/2023, so mine must have been one of the last to have the faulty motor. Shame they didn't replace...

My understanding is that a number of the settings can be tuned based on the profile, so you and your partner can each have a key that unlocks to their own profile with memory seats and some other configurations attached. What's unclear to me though is which options are global and which are...

I was told to expect one in the post, collection 22nd of June, haven't seen it just yet...

Picked mine up from Hethel in June, no manual provided, told it was online only now

Perfect, thanks, I'll get mine printing!

Still not working, do you have the STL per chance?

Just tried to open the 3mf, Cura is telling me there are no models in it :unsure:

I can probably sort something out for small numbers of people, I had to buy enough screws/bolts for 6 sets, the issue is the print time, the two/three parts take probably 30 hours to print at the settings I was doing 😅

PETG

So for a while now I've been pondering about mounting the front number plate at a slightly leaned back angle, rather than on the original plinth that came with the car. Wondering if that might lessen the impact of the front plate. I have a 3d printer to hand so set out to design and build...

Did you have to put the car on a ramp to take off the rear diffuser? Or could you do it just climbing under the car?

If you have a chance, a comparison between the factory and open modes would be great. Sounds great on the video but I have no real grasp of how that compares to the factory setting

I got a notification today too, though, to the wrong address (I moved 6 months ago and did tell Lotus this but 🤷‍♂️). Good job I got the notification and that DHL allow you to change the delivery address!

Mine has done the second version of this once so far in 800 miles, how frequently is this happening to people?

@Tim Happy to share the STL? My car is due a clean and the stencilling has rubbed off

Saw a magma red at about 11:40 this morning on the M4. They were fast lane heading west not far from Bristol, I was fast lane going the opposite direction, not sure if they noticed mine or not 🤷‍♂️ First time I've seen one on the road since I picked mine up, and only second ever in the wild...

As we all know, the Emira key is notoriously difficult to attach to anything because of the internal key loop bit. I thought last night, what about using some TPU and creating a loop to go through. Well all of ten minutes later on Fusion 360, and voila Printed out of black TPU, this little...

My invoice was 685, so maybe around 700 delivered now?

So mine today, having not drive in a few days, but having had a few hours on a ctek to top up, pushed the button to start, kicked into life and then immediately off again, familiar to anyone? Started again and was fine on second attempt but weird how it stalled itself on that first attempt

Did you ever get anywhere with your wind noise? Established mine has a sound of rushing wind on the drivers side that isn't present on the passenger side. It was quite obvious to me from mile 0 (now on 400) but this is the first time I've sat on the passenger side so only just noticing the stark...

Possibly, though it would have to be quite a bit smaller. The back wall is full of cabling so the only place you can really attach to is the top of the fusebox, which not only isn't level, but it's also not that deep. It really is quite cramped down there to be honest.

Ok so I fitted my dash cam today, some parts were easier than others I found out. First up, trying to get the toeboard off to get to the fusebox. For some reason this proved very difficult in my car. Likewise, getting it back on also proved very difficult. Probably the hardest bit of trim I had...

I asked specifically about the exhaust during my collection on Thursday and Sam reckoned there would be one, I guess only time will tell 🤷‍♂️

Would you mind disclosing the part number (if you have it) and how much it cost, I think I may need one

The carpet didn't seem to be fitted correctly and was making it hard to get the board out, bit of pushing and the carpet tucked under properly

Well this is frustrating, I can't even get the passenger footrest off! I've undone and removed the clips but the bottom won't budge, seems it's being held in by a bump on the left and then a bump on the right at the bottom, pretty sure it shouldn't be this hard 😔

@Toomanyloti you're absolutely correct about the exhaust sound, totally agree and I did try to caveat what I was saying in one of my follow up comments. Though one counter point, you won't always be giving it full beans. There will be times where you're trundling through town and, for some, I...

I think in the Emira the 12v socket turns off 7 minutes (IIRC) after the ignition goes off, so I wouldn't expect it to work